• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why is My Car Ignition Locked?

There are many reasons your ignition may be stuck. The key may be dirty or have a broken wafer in it. This can be fixed by sliding the key in and out of the cylinder several times.

The pins on the lock cylinder may also be stuck. You could tap the cylinder lightly with a small tack-hammer.

Check the Battery

If your car is in Park or neutral, but won't turn on when the key is inserted into the ignition, there might be a problem with the transmission shifter switch. This can be easily fixed by moving the shifter up or down to put the car into the correct gear.

If the car is still unable to turn, the problem could be due to the neutral safety cable or transmission shifter. A mechanic or an auto locksmith can fix these issues.

It is also possible that the ignition cylinder has worn out. Over time, the ignition as well as the key can wear out, causing them to become difficult to insert or remove. A lubricant, such as silicon lock grease can address this issue, letting the wafers to slide into place.

Lint from your pocket and adhesive from tape that holds packages together can build up on the key, preventing it from being able to slide into the ignition. You can clean the keys using a cloth, or a cleaner, such as Triflow to fix this problem. It is also recommended to utilize a spare key in order to determine if the issue is with the key or the ignition cylinder lock repair.

When the key is in the ignition, you can tap it using a an hammer that is small. This can cause a slight vibration, which may be enough to loosen up the wafers inside the ignition and allow them to slide in the right position. However, you must be cautious not to harm the ignition key or cylinder.

If all of the above options are unsuccessful, it's time to contact a locksmith or automotive mechanic to have it looked at. It could be that the key is broken inside the ignition or it could be time to replace the entire thing. A locksmith can make a replacement key if the issue is with the key. If the problem is with the ignition cylinder, the car will need to be brought to a repair shop to have it repaired. Luckily, these problems are generally easy to fix car ignition.

Check the steering wheel

A simple problem that can stop the ignition from turning is the steering wheel being locked. It can happen when a driver accidentally engages the steering wheel as they exit or get into the vehicle. This usually happens by yanking the wheel and holding it against their body. It could also happen if an individual in the back seat is unable to stop it when they get out of the car ignition switch.

This is a straightforward solution that doesn't require an appointment with a mechanic or locksmith. First, check that the shifter is either in Park or Neutral. If it's not then gently pull or push the gear shifter until it moves to one of these positions. You should also activate the handbrake or press the brake before turning the key.

If the wheel isn't locked an inspection of the steering column will show if the key has been engaged with the lock. A small "Lock' label is usually located in the lower area of the ignition circle. It is possible to disengage this by gently moving the key or pulling it with moderate force. It is crucial not to apply too much force as this could cause damage to the key or even tear a wafer from the lock cylinder.

Another thing to try is to use a spare key to see if it can disengage the lock. This could mean that the key is worn out and no longer able engage the wafers inside the lock cylinder. A professional at Karl Chevrolet Webster City can create a new key if this is the case.

If the key doesn't engage after spraying penetrating lubricant, it could help. Simply spray a tiny amount around the ignition, and keyhole, then tap or jiggle it until it starts to engage. If this doesn't work, you will likely have to visit a specialist at your local dealership for cars. They'll be able give you a new key, and will also replace the ignition cylinder if necessary.

Check the Key

If you're unable to get your key to turn the ignition, it is likely that there is something wrong with your key. You can get rid of any foreign material (lint from packing tape or adhesive) from the key. You may also try alcohol on the key or Goo Gone to see if it aids.

If the pins inside the lock do not move properly when you insert your key, it is possible that they are stuck. If you have a spare key to test, you can put it in the ignition and gently removing it. This should allow you to hear and feel if the internal lock pins move as they ought to. If not, you could lubricate the pins with graphite powder. You can buy graphite in small tubes that can be squirted directly into the keyhole. This will allow the pins slide into place when you insert the key, and also prevent them from becoming stuck.

A more serious problem with your key may be that it has damaged or worn out, making it unable to engage the internal pins of the ignition cylinder. This may cause the cylinder of ignition to stop turning, which will prevent you from starting your vehicle. In this instance you'll need to take your vehicle to an auto repair shop or locksmith for service.

If you can turn your car with an extra key, and you have ruled out any issues with the battery or steering wheel, it is possible that the ignition cylinder has been worn out. It is possible to loosen the lock cylinder using the sharp end of a screwdriver or handle of a Hammer (not the head). Gently tapping on the cylinder will often free it, allowing you to turn your key and start your vehicle. If this does not work then you'll need to have the lock cylinder replaced by an expert mechanic.

Check the Ignition Socket

The ignition socket is where your key slides in and out of position when it is inserted. Most of the time, it gets covered in debris or as a result of regular wear and tear. You can try squirting some silicon lock lubricant (like WD-40) into the ignition to make things move along.

You can also use the small hammer, and tap gently on the inside of the ignition key replacement in order to loosen or reset pins that are out of alignment. Be careful not to overdo it or you may cause severe damage to the ignition switch.

It is essential to ensure that your car's gearbox is set to neutral or park prior to attempting this. A majority of modern cars have an electronic system that locks the steering wheel when it is not in neutral or park. This will stop the ignition key from turning.

If you have tried all of these steps and your key doesn't turn, it is possible that the ignition housing needs to be replaced. Different vehicles have different procedures for replacing the ignition cylinder, so it is essential to follow the correct procedure.

This usually involves removing the plastic cover that covers the steering column and ignition assembly. To remove it, you will need to first adjust the tilt-wheel to its lowest position and then remove any fasteners that hold it in place.

After removing the cover, you'll need to remove the old ignition key Won't turn cylinder from the steering column. It is then important to check the new one that you bought with the previous one to make sure they are an identical match. After this step is completed the new ignition cylinder will be installed in the same way that the previous one was removed.

It is possible that, despite our best efforts, an ignition could be damaged and need to be replaced. It is recommended that if this happens you contact an Tempe Locksmith. A locksmith can help you select the best replacement and ensure it is installed correctly so that your vehicle can start again.