• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Guard your precious possessions from thieves by adding a ghost immobiliser. Our TASSA certified system guards vehicles against hacking, key cloning, and vehicle immobiliser bypass.

The system is hidden inside the wiring loom of your vehicle, which makes it completely inaccessible to anyone looking. It works by creating the pin code push sequence by using buttons already on the steering wheel doors, door cards and the central console.

No circuit cuts

It's not surprising that owners are concerned about protecting the vehicle they've worked so hard to buy. Traditional security devices, like wheel locks or alarms, can be easily bypassed by thieves. Ghost immobilisers however is a highly efficient solution that works silently and cannot be detected by modern thieves.

A ghost immobiliser price immobiliser is a hidden device that connects to the CAN data network in your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU through existing buttons on the steering wheel, dash, and door panels to create an unique pin code that only you are aware of. The code can be altered at any time, and can contain up to 20 digits depending on your preference. It also comes with a secure emergency code that you can use in case you forget your PIN.

The ghost immobiliser is also helpful to prevent the relay box at your home from transmitting the signal of your car key, which could unlock the doors and start your vehicle. It also blocks high-tech methods to steal your vehicle, including OBD port hacking. The device is tiny, weatherproof and difficult to detect. It's also hard to hack.

Another benefit of the ghost immobiliser is that it can be installed to your vehicle without permanent marks. This is ideal for people who plan to resell their car in the future. It's also much more efficient and less time-consuming to install than an original factory-fitted system.

The Autowatch Ghost is a groundbreaking next-generation device that can stop theft of cars using contactless technology by connecting to the vehicle's CAN data network and using existing buttons to generate a unique PIN code. This is a hidden system that can be installed without severing any wires and does not require any additional key fobs. It can also be connected to the vehicle's original ECU, preventing thieves from gaining access by using a new key or replacing the ECU with an "relay". This system has been TASSA-verified and can be linked with an International Security Register. Owners can rest assured, knowing that their vehicle is protected from theft.

No RF scanning

You'll want to safeguard your vehicle from theft if you have spent a lot of money and time customizing it. Installing an immobiliser is one of the best ways to prevent theft. It will stop your vehicle from beginning until you enter an individual code. By using the buttons on your steering wheel and dashboard, you can generate an up to 20 digits long that is only known by you, ensuring that only you can drive your vehicle. You can also set up a valet and service mode that will allow you to temporarily start your vehicle without entering the PIN code. This will allow the technician to work on your vehicle without being present. This is a great feature for those who want to save time and make their life simpler.

A ford focus ghost installer immobiliser is a next-generation device that connects to your vehicles CAN data network and utilizes the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to be discrete, with no LED indicator or noise to give it away, and can be fitted anywhere on the vehicle, without affecting the appearance of your beloved vehicle.

This stealthy system is approved by TASSA and could lower the cost of insurance. It comes with a tracking feature that allows you to locate your vehicle even if it's stolen. This is useful if you have a costly or rare vehicle that you've spent lots of time personalising.

autowatch ghost Immobiliser fitting ghost immobiliser and tracker, in conjunction with the iPhone app, allows you to remotely start your car when you've lost your PIN or are unable to access your vehicle. This feature is ideal when you need to do some errands, or drop off your kids, but do not want to let someone else drive your car. This feature is beneficial if you have to take your car to a mechanic to be repaired or serviced.

Another advantage of the Ghost is that it does not transmit or detect radio frequency signals, which makes it undetectable to thieves who use RF scanning or code grabbing technology. It can also protect your car from key cloning, ECU swapping and other typical methods of theft.

No key to cloning

Ghost immobilisers are a fantastic option for protecting high-end vehicles and are designed to prevent key copying. They prevent your vehicle from starting until a PIN code has been entered in conjunction with the regular key fob. This makes it more difficult for thieves to steal the vehicle, and can discourage them from trying. This is an especially good idea if you have invested a lot of time and money in personalising your vehicle, or own a rare or expensive model.

These immobilisers connect to the vehicle's onboard CAN network and are completely hidden, meaning there is no visible indication of its presence in the vehicle. It is also impossible for thieves to detect the device by using radio frequency scanning or code technology for grabbing. This means that a thief will have to spend a lot more time in order to take your vehicle.

To bypass the system thieves need to know the unique pin code and the location of the Ghost. The pin code is unique to you and can change it as often as needed. The pin code is easy for you to remember but mathematically unattainable for someone else to understand. The engineer will also have provided an emergency pin number in the event that you forget the pin.

The Ghost CAN bus immobiliser is weatherproof, and can be installed in any location of your vehicle. It works with all vehicles and can be fully customizable to match your car's appearance. It is also simple to use and affordable. The device can be moved to a different vehicle, as long as it is compatible with the new vehicle.

The immobiliser on the CAN bus is compatible with many other security features. For instance, it could detect the damage to your vehicle and alert the owner. It can also stop the engine if the vehicle is damaged. The system can protect your vehicle from hacking as well as key duplication. It can also detect vibrations and contact with the vehicle. It will also notify the owner when the vehicle is moving.

No OBD port hacking

Ghost employs a hidden immobiliser module connected to the CAN data network of your vehicle which prevents a thief from gaining access to your vehicle to disable the alarm, turn off the key fob, and then code new keys. This technology is an improvement over the old methods employed by thieves to steal vehicles in the past. The CAN data network also ensures that the system won't be affected by disconnecting or replacing your battery.

The Autowatch Ghost, the first non-detectable CAN bus immobiliser aftermarket worldwide, safeguards against key-cloning, hacking, and replica car theft. It works without LED indications or key fobs, instead leveraging the buttons in your steering wheel or centre console, as well as the door panels to allow you to create a unique PIN sequence (up to 20 button presses) which must be entered before you can drive your vehicle away.

Modern thieves employ diagnostics to find circuit breaks in your vehicle. They can bypass immobilisers which require a large amount of wiring or are integrated in the wiring. The Ghost is weatherproof, doesn't need any additional wiring and isn't detected by diagnostic tools of a professional. It can be even installed on vehicles equipped with anti-theft devices.

Another advantage of a Ghost immobiliser is that your vehicle is only able to be started by someone who has the PIN code and has physical access to your vehicle. This is a significant advantage over traditional security systems which are able to be bypassed using cable alteration, a screwdriver or an universal remote controller.

If you forget your PIN, you can easily reset it with the emergency PIN override function on a mobile phone or computer. This is useful if you want to start your vehicle after it has been left in a garage or using the help of a valet parking service.

The autowatch ghost immobiliser cost ghost ii immobiliser 2 has been approved for insurance by TASSA and is able to be installed by our authorized installers. It has an RFID fingerprint system that can identify parts that are not in use that allow for the return of stolen items if they are discovered. It can also be turned into a service mode' which permits the engine to be started when your vehicle is in a garage or with valet parking but you will need to enter your PIN code again to exit the car.