• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. However, if you have double-pane windows that are anchored by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this case it is essential to purchase plastic spacers to help the new pane fit into the window repairs near me frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled under.

Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional can come out and repair the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they can suffer from a variety of issues like sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows so you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after you have repositioned your hinges. If you're happy with the fit, tighten the screws until they stay in position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows remain watertight and draught-proof.

uPVC handles could also become loose. This is typically caused by screws that have become undone over time, but it could be caused by the handle mechanism getting worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to close the window and perform a test fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you get up each morning to find a smoky wall and wet floors. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on how severe the problem is, the old caulking might need to be removed. When it comes to uPVC repair, it is important to avoid over-caulking. This can make your window more difficult to clean and reduce its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double glazed window repairs near me-glazed window, it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your upvc window repairs near me windows are difficult to open, or slack and blow open with ease it could be the hinges that are at fault. They can be easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It's easy to replace a hinge on a window but it's much easier if someone else helps hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. This can be done by checking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused either by opening the window improperly or by a poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be pleased to offer you suggestions.

It is also essential to grease the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. The ideal time to perform this every year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause a gap to form where the sash joins the frame. If they are beyond repair, it could be necessary to get them re-aligned. The second is the interlock, which is on the hinge side of the window, may also be misaligned, and again it's possible to just give them a good clean, but in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen the risk of draughts.

One of the most effective methods to reduce draughts is by using a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be placed on the windowsill on top. They will help block out cold air and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security in your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it could be more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it's recommended to seek help from a professional immediately.