• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. However, if you have double-pane windows that are held in place by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this situation, you will need to find some plastic spacers that will assist the new pane to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass so that any shards fall onto the fabric rather than on the floor where they can be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional can come out and repair the window. This also serves as an obstacle to stop intruders from getting into your home. If the distance between the window and the door is large, you might need to consider an alarm system that includes a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. As time passes, they may be affected by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the size of the window, tighten the screws to hold them in the right position.

If you aren't able to move the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and become dry and cause their tightness to decrease. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is typically caused by screws that have loosened over time, but it can also be caused by the handle mechanism wearing out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and then perform a test fitting. The corners of the sash should be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most often, upvc window repair window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on how serious the problem is, the old caulking may have to be removed. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you might have to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more with the seal than the frame. Again this can easily be fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens with the breeze. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. It is an easy procedure, but it is easier with someone else to assist in holding the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The issue can be caused by opening the window incorrectly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be more than happy to give you suggestions.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also stop corrosion and reduce the risk of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. Firstly the hinges, again due to wear and tear can become misaligned, this causes an opening to appear where the sash joins the frame. They can be fixed by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. Second, the interlock can also become misaligned. It is located on the hinge's side, and could require to be cleaned. In some instances it is possible to replace these.

The next most common cause of draughts is the window seals, these can become worn down or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will lessen the possibility of draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric filled with some sort of filler and can be put on top of your windowsill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security to your home with regular maintenance and repairs. It is crucial to realize that all windows have a life span and eventually, they will reach the point when it's more efficient to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as you can.