• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors wear out over time and will need to be replaced. In this case, it is crucial that the new handles match the critical dimensions of the old handle.

The three measurements to be inspected are the top screw's position, lever and key hole sizes. Check the size guide for assistance with this.

Inline Lever/Lever

A lever/lever patio door handle with lock handle is a contemporary handle that can be installed on replacement or new doors. This kind door handle is offered in a variety of designs and finishes. This handle is offered by several manufacturers, including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles of uPVC/Composite are constructed of durable materials and are perfect for multi-point lock doors that require a heavy duty design. The handles are inline, and use the same spindle and screws to fix them. They can be easily installed on new or existing uPVC/Composite doors.

The design of the sprung lever allows the handle to be positioned and angled to ensure a comfortable experience and is suitable for all users. The handle has been tested to 200 000 cycles. This helps ensure that the finish is of high quality and performance over time. The lever that is sprung can be shortened to fit more locks. This is useful in doors that are narrower, where the cylinder is situated further back in the door. A shortened lever can also be used for doors with latches that can be opened by the thumb inside.

Lever Pad

A Lever Pad upvc door handle operates differently from lever-type window handles for wooden windows found on most doors. These handles can work off one single spindle (inline) or independently from each side by using two inline or offset spindles (pad). They are usually employed on UPVC double-glazed doors and come in many variations & finishes.

The handles are available in various finishes, including White Chrome and Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, which gives the handle a high level of durability and performance for the intended use.

All of the UPVC lever pad designs come with a spindle and screws which allow them to be installed on a new or existing uPVC door. The backplate fixation centers of 211mm permit a larger handle, which is often beneficial when replacing an old or faulty multi-point door lock mechanism. These handle levers are also spring-loaded, thereby solving the issue of handles for patio doors hanging out of their horizontal position when they are not in use.

When choosing the replacement UPVC handle and spindle it is crucial to match the dimensions of the PZ of both the multipoint lock and the uPVC door. This measurement may also be referred to as 'handle centres or cylinder centres'. It is important to match the right handles.

When you have the right PZ size you will then be required to make sure that the lever pads and push pads are of a appropriate shape to accommodate the American with Disabilities Act (ADA) compatible handles you need for your doors. These are typically of a round or square shape with an internal lever as well as an external push pad.

The majority of UPVC lever pads that we offer are sprung, which means that they will return to their horizontal position when not in use, instead of hanging out and potentially sticking in the frame. This prevents draughts from entering the building. It is also the case that the majority of UPVC window handle replacement lever pad style handles are handed that allows you to put them on either side of the door.

Euro Cylinder

Cylinder locks are commonly found on uPVC doors, but can also be found on other types of doors. The cylinder lock is operated with a key that unlocks the cylinder case. This reveals pins that can be aligned with the pins in the lock, allowing them to turn the camera that rotates, opening the door. Euro Cylinders are available with up to six pins. Doors that are internal and external require different levels of security.

Selecting the right cylinder for your needs is essential; it is dependent on how your door and handle are used. For instance, doors that are external must be secured with a higher security cylinder, while internal doors can be secured using an ordinary cylinder. In addition, some cylinders are available with extra features that increase security, for instance anti-drill or anti-bump features.

To ensure that the euro cylinder is the correct size for your door, it must be measured accurately. The cylinder should be measured from the hole in the center of the fixing screw to the other end of the cylinder and the thumb turn if you have one. It is best to do this with the lock in place, but when this isn't possible, you can remove it to measure. It is crucial to avoid having a extension of the cylinder beyond the handle or escutcheon. This can make it vulnerable to snapping lock attacks.

The majority of modern cylinders have been made with bump and anti-drill features that are built into their design. They are designed to decrease the chance of attack by forcing cylinders to turn in a different direction. This will help to stop the attack and keep your doors safe.

Certain cylinders are made to withstand snapping. This is an increasingly common method of attack on cylinders, which is where the break line of the lock is smashed with a special tool to break off the front of the cylinder to allow the door to be opened. This is much quicker and less difficult than opening the door with a multipoint lock and leaves no evidence of a burglary, which could hinder an insurance claim.

Spring Cassette

The spring cassette is situated within the base plate of the door handle. It offers a spring-loaded solution to help return your multipoint lock handles to their resting position after usage. In the past, a lot of these types of handle didn't have a spring built into them and without this they tend to droop or 'drop' once the locking mechanism is removed. Adding this simple component is one of the most effective ways to fix this and it is also a great way to prevent your upvc doors from getting stuck in the open or closed position, since they aren't always easy to close manually.

These spring cassettes are specifically designed for use with multipoint locks that are sprung, they will not fit multipoint handles that are not sprung and you must have a custom hole cut into the backplate to allow them to fit (please see image for technical diagram). They are a replacement for existing broken or missing cassettes within the door handle backplate of many kinds of uPVC doors. They are supplied in a single unit. They have a square-cut out that accommodates an 8mm shaft.

These spring cassettes are a fantastic value-for-money solution to the issue of your door handles that are sagging. They are simple to put in and will increase the lifespan of your uPVC doors. For more information on our range of uPVC accessories and spares, you can get in contact with our team. We are on hand to assist and offer professional advice.