• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Secures your vehicle from key cloning and prevents thieves from driving it using the keys you originally had. Our latest immobiliser connects to your vehicle's data network, CAN, and the unique PIN code needs to be entered in order for the engine to start.

Ghost, unlike trackers, doesn't emit radio frequency signals and cannot be identified by diagnostic tools. Audi Rs4 Ghost Installer doesn't have LED indicators or buttons that would signal its presence in your car or van.

Anti-key cloning

The ghost immobiliser was created to fight key hacking and cloning. This device is connected to your vehicle's data network CAN and creates a unique pin number using the factory buttons on your dashboard and steering. This prevents thieves from being able to start your car. If the wrong PIN code is entered, the engine will not be started which makes it impossible for them to leave with your pride and joy.

Ghost immobilisers use an innovative technology that is very difficult for thieves to beat. Unlike physical deterrents like wheel locks and steering locks which can be cut or stolen, the ghost immobiliser is a discreet electronic device that isn't easily detected by regular thieves because it doesn't emit radio signals and works silently.

This next generation immobiliser is equipped to shield your car from a variety of threats including keys that are duplicated, key-hacking, and relay attacks. It also has the ability to prevent thieves from adding an additional key or replacing your ECU, as it will not allow them to start your car without entering the correct PIN code before entering.

In contrast to other immobilisers the ghost immobiliser 2 does NOT require any additional key fobs or remotes in order to operate. It can be turned off by the driver's smartphone using a simple app. This makes it ideal for those times when you have to give your car to valet parking or servicing without key fobs.

The autowatch ghost installers midlands Ghost-II is the latest version of our groundbreaking ghost immobiliser. It was designed to make it as easy and convenient to use, while still being as secure as it can be. This is done by linking the Ghost-II into the vehicle's data network CAN, meaning that there are no additional wires that can be hidden or easily found. It also comes with an inbuilt feature that allows you to deactivate the Ghost-II simply by connecting to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking has become the most recent method employed by professional car thieves. Thieves are able to access your vehicle's OBD port with no more than a laptop, an application, and a few cables that can be purchased online for less than PS50. Once they have access, they will be able to do anything they want, from resetting your vehicle's fault codes, tuning your car, or getting it stolen in less than a minute.

If you have an Ghost immobiliser, it can stop your car being stolen with this method by needing an unique PIN code sequence is entered into the fob of your key in order to start the engine and drive away. It does this by interacting with the vehicle's ECU (Engine Control Unit) via the CAN Data circuit, and is completely undetectable to any RF scanning or code grabbing technology. It also has a Service/Valet Mode that allows your vehicle to start without the PIN code.

To make use of an OBD hacking device, you'll need to have a laptop with software capable of interpreting the OBD protocol. This is available for less than PS100 on eBay or Amazon. You'll also require a cable with OBD pins connected to CAN Bus. These cables can be purchased at Amazon or Ebay for around PS50. The cable needs to be connected to the wiring harness of your car, such as the radio wiring harness.

Once the hacker has access to the OBD port of your vehicle, they can send diagnostics to the system at a high baud rates which can cause a crash to the car's CAN and stop the system from functioning. This can cause your car's engine to stall or even lock up.

There is no need for additional remotes or key fobs

The car immobiliser is a great piece of anti-theft technology that is utilized by millions of modern vehicles all over the world. An aftermarket immobiliser safeguards your vehicle through the use of engine ECU software that blocks cars from starting when an untrue transponder signal is sent.

However, it can be easy for thieves to get around an immobiliser system if they have access to the code to deactivate it. The battery in most key fobs can be removed by removing it and a burglar can use a simple tool to take out the immobiliser's circuit board and replace it with a blank. They will then be capable of starting your car.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is accomplished through a discrete, silent data loop in CAN that cannot be detected by diagnostic tools like those used by high tech thieves. It doesn't come with a traditional keyfob that has an LED indicators, which means it's not visible.

You may have to turn off Autowatch's Ghost 2 auto protection at certain times, such as during valet parking or during a service. Ghost CAN immobilisers have a mode called 'Service Mode that you can activate with just a click of a phone button. The car can still be operated however the maximum speed is restricted to 36 mph for added security.

Contact us today to schedule an appointment for a demonstration in our workshop. A member of our team will provide a full breakdown of the process and provide you with your owner's manuals, installation certificates, ghost autowatch immobiliser 2 emergency card and security assurance.

Simple change of PIN code

Ghost is a new generation device that secures your vehicle without cutting wires or adding aftermarket key fobs. It connects directly to the vehicle's CAN data network, and a personalised PIN code is programmed in it by pressing buttons on your steering wheel & the dash. The system blocks engine start and cannot be bypassed as no RF signals are emitted from the device. This makes it difficult to be detected by sophisticated RF scanning and code grabbing techniques that are used by modern thieves.

The PIN code can be changed to block previous drivers or even include an override code in case you forget the sequence. The installer will guide you through the procedure to accomplish this during installation. The system has a valet-mode feature that allows you to temporarily disable pin input sequences, so that your mechanic or garage can service the vehicle without having to know the code. This is a great choice for those who do not want their pin number to be disclosed, but want to leave their car with valet parking or service.

In contrast to Thatcham products that require additional key-fobs to operate, Ghost is a discreet system that makes use of the buttons inside your vehicle to create a unique and interchangeable PIN code sequence. This sequence is entered through the app on your smartphone, which means there are no additional LEDs being thrown, and your vehicle is secure and safe from the possibility of being blocked by hackers or other technology.

Every vehicle is tested

Unlike key fobs that require you to press buttons the ghost immobiliser is hidden under the dash or steering wheel to make sure you are unaware it's there. The device is connected to your vehicle's CAN data network and a personalised PIN code is programmed into it by using the buttons already on your car. The system stops the engine from starting until the code has been entered before. This means that thieves cannot duplicate the keys of your vehicle or gain access to the OBD to hack into it.

Ghost can be used in all vehicles, including electric cars, vans, motorhomes and bikes. It's also extremely flexible and can be programmed to turn off in various situations. For instance, it could be programmed to enter Valet mode when the vehicle is being taken to a valet parking or servicing company. This means that your car can be operated within a set 30mph speed limit, and the bmw x6 ghost installer immobiliser will reactivate itself once it is returned to your possession.

Another excellent feature is that the device can be reset to your personalised PIN at any time. This is beneficial when you forget the code or the device ceases to function, meaning that it's effectively just as good as new.

It is also unnoticed by anyone who doesn't know what it is. It does this by analyzing the buttons on your dashboard and steering wheel and then using the information it sends to determine which button was pressed. This makes it a safe and secure security system that can't be tampered through RF scanning or jamming, or a door lock pick set.