• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like aluminum or timber.

It is essential to clean and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is essential to make sure that your windows are in good working order.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the old frame very easily. However, if you have double-pane windows that are secured by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation you'll need source some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.

If you are going to attempt to remove the glass panes yourself it is important to wear appropriate safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor and could be trampled.

It's a good idea to cover the gap with tape after the glass is removed. This will keep drafts and water from getting into your home until a professional arrives to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the distance between the door and the window is significant, you may need to consider an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of problems including sagging. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges can help fix a window that is sagging. To accomplish this, you'll have to open the window to get to the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and check for fitting. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen. Often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need close the window and then perform an initial test fit. The joint at the corner of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is important to take action if get up each morning to discover mouldy walls and floors that are wet. Water leaks from windows not only lead to the destruction of your home's structure but also hamper your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Based on the severity of the issue the old caulking may need to be removed before a fresh layer can be put on. It is important to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the issue is with the seal than the frame. It is also possible to be repaired by an upvc window repair near me window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open in a breeze it could be hinges that are at fault. They can be easily replaced by any competent DIYer and are usually completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It's very simple to change the hinges on a window but it's much easier if someone helps you hold the frame.

Make sure that the uPVC hinges are closed and open in the proper direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a photo on our website. We will be more than happy to give you suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a great method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be unbalanced due to wear, which can cause a gap where the sash meets frame. They can be repaired by giving them good cleaning, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. The interlock may be disaligned. It is located on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace these.

The seals may wear out or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen the possibility of draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder. These are usually fabric tubes filled with some sort of filler and can be positioned on the windowsill on top. They will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually wear out and it may be cheaper to replace them than to repair them. If you encounter any issues with your Upvc window it is recommended to speak with an expert as soon as possible.