• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can help homeowners save money while maintaining their comfort. In the event of major damages, like broken glass or a damaged frame, window replacement may be necessary.

Many other problems are fixable to extend the longevity of windows. Common problems include:

Cracked or Broken Panes

Cracked windows could be caused by a lawnmower that throws rocks at the wrong time or a tree branch being blown by strong winds. This not only looks terrible, but it could cause higher energy bills because broken glass lets cold air into your home. It's fairly easy to fix windows that have broken panes.

Begin by carefully removing glass with gloves and safety glasses. You may need to use an utility knife to remove old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the frame's wood using a soft cloth or paper towel.

After the area is cleaned and dry, apply a waterproof silicone caulking to the frame's perimeter. This will stop water from entering the frame through the cracks and causing further damage.

If you have double-pane glass cracks that are severe could damage the gas layer that lies between the panes and render your windows less insulative. If the crack is serious enough to threaten the integrity of the glass, or if you have an inner pane that's completely missing, it might be time to contact an expert.

Thermal stress cracks may also occur when there is a drastic difference in temperature both inside and outside your home. This causes the glass to expand and contract. If this happens on two windows, it's probably best to simply replace the pane instead of attempting to repair it.

If your windows are cracked and not yet ready to be replaced clear tape can do a decent job of stabilizing the crack and preventing bugs from entering cold air. You can cut a piece of nylon stocking or tarp that's sufficient to cover the crack and fix it with duct tape. It's not a solution that will last forever, but it works well in the event of a crisis and keeps insects and window repairs cold air away from your home. If you notice cracks appearing on your older windows it is recommended to contact your local business to determine whether replacing the entire window is the best option.

Rotten Wood

Wood rot is among the most frequent problems that plague windows. It can damage a home's appearance and create a security danger. It is, however, possible to fix rotted wood. It is first necessary to address the cause of the wood rot. Look for leaks on the roof and other areas where water can enter the wood.

The next step is to remove the rotten parts of the window frame. This can be done using the claw hammer, chisel, or rasp. After the areas that are rotten have been removed it is time to replace them with fresh wood. Pre-treated wood is suggested for this project, as it will resist rot. If you are not able to replace the timber that has rotted, you can use filler and wood hardener to reinforce the damaged area. This kind of product can be available at most hardware stores. Follow the directions on the label of the product to get the best results.

After you have repaired the damaged areas of the window sill, it's important that you protect the area. Apply a water-resistant sealant on the wood. Sikkens, for example is a great one to use.

You can also apply an epoxy filler that is two-part to protect the wood from further damage. It is easy to apply and leaves a beautiful finish. However, it's important that you follow the application instructions on the label. Once the epoxy filler has dried, you are able to sand the surface of the wood. Start with a rough sandpaper then move to more smoother grades.

You do not want to expose the damaged part to further moisture. It is a good idea, that's why you should cover the surface repaired with an oil-based primer that will protect it from moisture. Then, you can apply the waterproof wood sealant.

The Won't open

There are a variety of reasons a window won't open. The house could have settled, or the wood frames could have warped during rainy weather. Somebody may have secured them with a nail for security. However, with a bit of patience and the right tools, most windows that are stuck can be opened.

Gunk or debris that has accumulated can be a major reason of a window not opening. Acme Glass notes that dirt and grime build up over time on sliding tracks, hinges, and locks. Additionally, metal hardware can rust when it comes into contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease can help to prevent oxidation and keep your window functioning well.

Stuck windows may be caused by a loosening or breakage of the pulleys that are used to lift and lower the window. These components may lose tension and become obstructed particularly if the window is located two or more stories higher than the ground.

If you're having difficulty opening a window, try using a pry bar to gently force the window to open a bit at a time. Put a piece of wood on the frame to give your pry bar more leverage. Also, be careful not to damage the window or the wood. You can also try running a hair dryer around the edges of the frame for several minutes to warm the wood and help it move more easily.

Another common issue with windows that don't open is a defective spring that stops the upvc window repair jamb from rising or lowering. You will need to consult your owner's guide for more information depending on who made your windows.

If you have tried cleaning the moving parts of your windows and lubricating them but they still won't open It could be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows slide from functional to unusable because a window that isn't properly shut could leave your home vulnerable to burglary and water damage. Contact us for more information about our windows replacement services and products today!