• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and upvc window repairs long-lasting alternative to timber windows with sash. Over time, they can be affected by a variety of issues that include sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need to open the window to get to the frame. With the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in the right position.

If you aren't able to move the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows are waterproof and safe from drafts.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can also be due to the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an experiment fit. The corners of the sash should align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's crucial to take action. Water leaks from windows are not just a cause for destruction of your home's structure but also hinder your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer can be put on. It is important to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leakage originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily repaired by a uPVC window repair specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens in an ease. These are easily repaired by any DIYer who is skilled and can be done within a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It is an easy process but it can be easier when you have a person to help hold the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused either by opening the window incorrectly or due to a poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are always happy to offer advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also lower the chance of windows getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. First, the hinges due to wear and tear can become misaligned, this can cause an opening to appear where the sash meets the frame. They can be repaired by giving them good clean, but if they are beyond repair it could be necessary to have them aligned or replaced. Secondly the interlock, this is located on the hinge of the window and can also be misaligned, and again it is possible to just give them a clean but in some instances it could be necessary to get them replaced.

The next most common reason for draughts are the window seals. They are prone to wear or damaged over time, and let air escape through the gaps. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it is more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your upvc window, it's best to consult an expert as soon as you can.