• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation you'll need to locate some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

If you're planning attempt to remove the glass panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor, where they could be trampled.

Once the glass is removed from the window, it's best to seal the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional comes out and repair the window. This also serves as an obstruction to prevent intruders from getting into your home. If the distance between the window and the door is substantial, you may need to consider a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, with time, they are susceptible to a range of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to open the windows so you can reach the frame. Then, using the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the fitting. If you're happy with the fit, you can tighten the screws to ensure they stay in the right place.

If you aren't able to move the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and uPVC window repairs draughtproof.

uPVC handles could also become loose. This is often caused by screws that have become undone over time, but it could also be due to the handle mechanism wears out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and then perform an initial test to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. Water leaks from windows can not only cause destruction of your home's structure but also hamper your efforts to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue the old caulking may require removal before a new layer can be applied. It is essential to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and can reduce your energy efficiency.

Make sure that the drainage holes do not have debris in them and that the sill pan is angled correctly to drain away from the window. In more serious instances, uPVC window repairs you might have to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze It could be hinges that are at fault. These are easily replaced by any competent DIYer and can be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It's very simple to change a window hinge but it's much easier if someone else helps hold the frame.

Check that the upvc window repairs hinges are closed and open in the proper direction. This can be done by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a certain way or due to inadequate installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be more than happy to give you suggestions.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different factors. First, the hinges due to wear and tear could become misaligned. This causes a gap to form where the sash joins the frame. They can be repaired by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. In addition, the interlock could be misaligned. This happens on the hinge side and may need to be cleaned. In some cases it might be necessary to replace them.

The second most frequent reason for draughts is window seals, these are prone to wear or damaged over time and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures and decrease the risk of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually wear out and it is more cost-effective to replace them instead of fixing them. If you encounter any issues with your window made of upvc window repairs it is recommended to speak with an expert immediately.