• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance, you will need to locate some plastic spacers that assist the new pane to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass so that any shards fall onto the fabric instead of landing on the floor where they could be trodden under and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. Over time, they can develop a number of problems that include sliding. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll have to open the window repair to get to the frame. Then, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. It is crucial to replace your seal as quickly as you can in order to ensure that your upvc window repair window waterproof and draughtproof.

UPVC handles can also loosen up. Most often, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's fairly simple to repair a loose upvc window repairs near me handle. First, you'll need to close the window and then perform a test fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer can be applied. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

Verify that the drainage holes do not have debris in them and that the sill pan is angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread across the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. Again this can easily be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze it could be the hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window however it is easier if someone else helps you hold the frame.

It is also important to ensure that the upvc window repairs near me hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window improperly or a faulty installation in the factory. This issue can be fixed by sending us a photo via our website and we will be pleased to offer you suggestions.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. Firstly the hinges, again due to wear and tear may become displaced, which causes gaps to develop where the sash joins the frame. They can be repaired by giving them good clean, but in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock may also become misaligned. It is located on the hinge's side and might require to be cleaned. In some cases it is possible to replace these.

The next common reason for draughts is window seals. They are susceptible to being worn out or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking cold air.

With a little maintenance and repair, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually wear out and it may be more cost-effective to replace them rather than repair them. If you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional immediately.