• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions from theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs.

The device makes use of buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin code sequence that can be modified up to 20 times. This will then authorize the start-up of your vehicle.

Simple PIN code Change Process

Many homeowners are upgrading their security because of the rise in vehicle theft. There are a variety of security products that are available for sale that range rover sport ghost installer from tracking systems to alarms and immobilisers. However there are a few that are equally efficient in protecting your vehicle. A tracking device can help you locate your vehicle in the event of it being stolen however, it won't prevent the crime. An immobiliser, on other hand is exactly what says on the label: it shuts off the engine of your vehicle so that it is unable to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to steal your vehicle.

Using the existing buttons in your car, the ghost device creates an exclusive sequence that has to be entered prior to the engine can start. This can be accomplished by using the window, heater or indicator stalk buttons. In addition to this option, there is an app on mobile that can act as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This is especially useful when you need to hand your car over to a valet service or parking, as the immobiliser is activated, but not disabled.

The ghost immobiliser and tracker is a unique and innovative device that works in conjunction with the buttons in your vehicle rather than as a separate device. It is not only an effective deterrent to vehicle theft, but it can also be used on any future vehicles you own. This makes it a far better investment than a traditional wheel lock.

Weatherproof tiny device

The autowatch ghost immobiliser cost Ghost Immobiliser is a sophisticated security system that safeguards your pride & joy from key cloning and hacking. It also stops ECU swapping. It is a small, weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus to stop the motor. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to make sure it works with all vehicles. It is also resistant to jamming devices that are a common technique used by thieves to bypass the immobilisers in place.

The benefit of using CAN data is that it operates silently compared to traditional systems. It can't be detected by sophisticated RF scanning or code-grabbing technologies and is likewise unreadable by conventional diagnostic tools. The autowatch ghost 2 installers near me ghost does not produce LEDs, but instead utilizes the buttons in your vehicle like the steering wheel or centre console panels to create a unique, changeable disarm sequence. This sequence can be extended up to 20 presses for additional security. The iPhone app only allows one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is secured.

The Ghost prevents car thieves adding an ignition key replacement or replacing the ECU to bypass the immobiliser. It will only allow the engine to start if the correct PIN code is entered. It is possible to operate temporarily in Valet/Service mode (with parameters set, such as 30mph speed limit), so you can offer your vehicle to valet or service without needing to enter a code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that connects to the wiring of your vehicle and connects to your engine control unit (ECU). The device intercepts signals to stop your car from starting normally until you enter a custom code. The system can be turned on and off through your smartphone's app without the need for additional wires.

The standard factory immobilisers work by using a transponder that is integrated into the key. It transmits a message to the ECU. If the correct code is transmitted the car will begin, but if a transponder is swapped with one from another vehicle the immobiliser won't recognize it. This allows the vehicle be started and stolen. A South African company that is at the forefront of vehicle safety systems technology created the Ghost immobiliser. It shields your vehicle from key cloning, hacking and even key theft. The only way a thief could steal your car is by physically towing it away, and even then they wouldn't be able to drive it.

Ghost uses the buttons in your car, such as the indicator stalk, steering wheel and door panels to create an unique PIN sequence that can be changed that must be entered before you can drive. This is done without additional hardware, like keys fobs. It can take up 20 to 20 presses. It is also inaccessible to diagnostics equipment and does not transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanning or code grabbing technology to discover that a security system has been installed.

Ghost is more difficult to remove than car alarms, which require disarming using several buttons. This makes it an excellent complement to a GPS tracker, which can help locate your car after it's been stolen.

Override of emergency PIN code

You don't need to go far on social media to find stories or even videos of vehicles that have been taken by thieves using the latest technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle without the original keys.

The Ghost immobiliser has been specifically designed to prevent this, and give you an extra layer of security in order to keep your vehicle from being targeted by thieves. It is created by creating an individual pin code sequence that is triggered by your buttons on the steering wheel, door panel and the centre console. This unique PIN has to be entered in conjunction with your original key fob in order to stop the vehicle from starting. The unique override pin can be found on a black plastic card which you will receive following the installation. It is easy to remember since there are no LED indicators.

The device is hidden within the vehicle's wiring and does not emit radio signals, therefore it can't be detected by modern thieves using diagnostic software that can detect the type of security system you have installed. This makes it an excellent alternative to an electronic device for tracking.

Contrary to most security systems that use a relay in the engine bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependent). This allows them to shut down the vehicle completely by sending a digital block to the ECU and engine.

They can also be linked to an analog alarm, immobiliser or tracker. This must be specified prior to installation. They also work with valet and service modes, and are a great alternative to a tracker device when you bring your vehicle to the dealer for repairs to an electrical problem.

Service/Valet Mode

In recent years, there has seen an increase in the number of cars being stolen from owners without keys. With the ease of access to key cloning equipment and door lock pick sets, it is now easier than ever for thieves to steal your joy and pride. We have developed the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, even if you keys have been copied.

It connects directly to your car's ECU (Engine Control Unit) via the data loop called CAN. It's completely quiet since it doesn't use radio frequency or key fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also protects the user from using an ECU or key to circumvent the system, as only the PIN code allows the engine to be started.

The device is hidden inside your car, using buttons on the steering wheel, centre console and door panels. Before you can start your vehicle, you must enter a unique, changeable PIN code that can be as long as 20 numbers.

This is the very first aftermarket CAN bus immobiliser that was designed. It will stop your vehicle from being driven or started if you don't enter a PIN number first. If you're driving away with the device armed it will display an indicator on your dashboard and flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to function as normal. If you don't enter your PIN code at this time the indication will keep flashing & will require a new PIN code for every attempt to start your car.