• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The ghost immobiliser cost Immobiliser

Guard your precious possessions from theft by using the Ghost Immobiliser. It is discreet and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin code sequence that can be altered up to 20 times. This will allow your vehicle to begin.

Simple change of PIN code

Many owners are upgrading their security due to the rising number of vehicle thefts. There are many types of aftermarket security devices available, from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. A tracking system can assist you in locating your vehicle if it's stolen, but it will not prevent the crime. Immobilisers, on the other hand does exactly what it says on the tin: it shuts down the engine of your vehicle so that it is unable to be started. The autowatch ghost installers midlands Ghost is one of the most sophisticated options available, making it virtually impossible for thieves to steal your vehicle.

By using the buttons that are already present in your car, the ghost device creates an exclusive sequence that has to be entered before the car's engine will start. This can be done using the indicator stalk or window buttons. In addition to this option, there is an app on mobile that can function as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is especially useful when you need to surrender your car for valet parking or maintenance since the immobiliser will still be activated, but not disabled.

The Ghost is an unique and innovative device that works by using the buttons of your vehicle instead of as a standalone unit. It's not just an effective deterrent to vehicle theft and vandalism, but it can be used to secure any future vehicles you may own. This makes it a much better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is an advanced security system that protects your pride and joy against key cloning, hacking & ECU swapping. It is a small, weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus to stop the motor. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices which are a typical technique used by thieves to bypass immobilisers.

The benefit of CAN data over traditional systems is that they operate silently. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators and instead uses buttons in your vehicle, like the steering wheel, centre console, or door panels, to create an unique sequence of disarming. You can make this sequence as long as 20 presses to increase security. The iPhone app allows only one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is secured.

The Ghost prevents car thieves adding a new ignition key or replacing the ECU to bypass the immobiliser. The engine will only start only if a valid PIN is entered. It can also be put into Valet/Service mode for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can give your car to a valet service for maintenance without having to enter a pin code.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device intercepts electronic signals that block the system of your vehicle from going through its normal start-up routine until you input the passcode you have created. The system can be activated or deactivated through your smartphone's app without the need for additional wires.

The factory-installed immobilisers function with a transponder which is embedded in the key. It transmits a message to the ECU. The car will begin to start if the correct code is transmitted. However, if a transponder from a different vehicle is used instead, the immobiliser will not recognise it. This makes it possible for the vehicle to be stolen and started. The Ghost immobiliser has been developed by an South African company at the top of security systems for vehicles technology. It safeguards your vehicle from hacking, key cloning and even key theft. Only by physically towing your car away can thieves take it away, and they would still not be able to drive the vehicle.

Ghost utilizes the buttons of your vehicle, including the indicator stalk as well as the steering wheel and door panels to generate an individual, changeable PIN code sequence that must be entered prior to you can use your car. This is not required to use extra hardware such as a key-fob and can last up to 20 presses long. It is also unrecognizable to diagnostics equipment and doesn't transmit radio frequency signals so thieves are not able to make use of sophisticated RF scanning or code-grabbing technology to discover that security systems have been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks Ghost is hidden within the vehicle, so it cannot be taken away or disabled by thieves. It is even more difficult to get rid of than a car alarm, which requires disarming using an action sequence. This makes it a perfect complement to a GPS tracker that can assist in locating your vehicle after it has been taken.

Override of emergency PIN code

You do not have to look far on social media to see stories or even videos of vehicles that have been stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the car without your original keys.

The ghost install immobiliser has been specifically designed to prevent this, and give you an extra layer of security in order to protect your vehicle from being targeted by thieves. It works by creating an unique pin code sequence that is triggered by the buttons you have on the steering wheel, door panel, and the centre console. This unique PIN must be entered along with your original key fob in order to stop the vehicle from getting started. The unique override pin is located on a black card which you will receive following your installation. It is simple to remember because there aren't any LED indicators.

The device is hidden within the vehicle's wiring and does not emit radio signals, therefore it isn't able to be detected by modern thieves with diagnostic software that can recognise what type of security system you have installed. This makes it a fantastic alternative to a tracking device.

Contrary to other security systems that rely on a relay located in the engine bay, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This enables them to shut down the vehicle completely by sending the use of a digital block of commands for both the ECU and the engine.

They can also be linked to a separate analogue alarm, immobiliser or tracker. This must be specified prior to the installation. They are also compatible with valet/service modes and a great alternative to a tracking device when you bring your vehicle to the dealer for an electrical problem.

Service/Valet Mode

In recent times, there has been a increase in the number of vehicles that are stolen without owners' keys. It's now easier than ever before to steal your pride & joy due to the availability of key cloning tools & door lock picks. To prevent this from happening, we have launched the autowatch ghost installation walsall Ghost immobiliser that prevents your car from being driven despite the fact that your keys were cloned or your car was stolen.

It directly communicates with your car's ECU (Engine Control Unit) via the CAN data circuit. It is completely silent as it does not use radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also prevents the addition of a new key or replacing the ECU to bypass the system as only the correct PIN code will allow the engine to start.

The device is hidden inside your vehicle and is reached via the buttons on your steering wheel, center console, and door panels. A unique & changeable PIN code sequence up to 20 digits has to be entered prior to being able to start your car.

This is the first aftermarket CAN-bus immobiliser that was designed. It will stop your vehicle from being driven or even started if you don't enter a PIN code before entering. If the device is armed and you attempt to drive off it will display an indication on your dash that will flash on a regular basis for approximately 300m. If you enter your PIN code at this point it will deactivate the anti-hijack system and your vehicle will continue to drive in the normal way. If you don't enter your PIN code at this point, the indicator will continue to flash and will require a new PIN code every attempt to start your vehicle.