• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how new your Subaru is, you might need to have your key fob programmed by an automotive locksmith. This is typically done by connecting a programming machine to the car's computer.

To program your subaru key fob upgrade unlock the driver's side door using the door button, and then close it. You will hear the chime and see the dome lights blink in the instrument panel.

Step 1: Locate the circuit board of your transmitter

There are a variety of ways to program your key fob. The first step is to know which kind of key fob you own. This can be done by looking at the design of the key fob, or by listening for a chime in your car.

Once you have the necessary information, you can start the process of programming your key fob from home. To do this, you will need a metal key and a screwdriver that has a flathead. You can open the key fob by twisting. Then push the metal key into the case and remove the battery from the tiny tabs which hold it in place. Replace the battery with a fresh one and then put the key fob case back together.

Step 2: Disconnect the key fob case

It is a good idea to replace the battery of key fobs if they're not working. However, there are some situations where to get a subaru key made the buttons on the key fob may be damaged. If you notice that the contacts made of metal on the button are loosened Try soldering them back into place again to make them function again.

Before you start the process, ensure your car's doors are shut and the ignition is off. Close the door on the driver's side and press the button 10 times in rapid succession. Then, you should hear the instrument panel chime, and your dome light should flash. This means that you are ready to move forward.

Step 3: Insert the Key Fob in the ignition

Many websites will show you how to program your new or replacement subaru new key keyfob at home. However, the majority of them don't provide very specific instructions. Reprogramming an electronic lock is best done by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat with the doors shut and the engine turned off. You can open the door button control and use it to unlock all doors. Close and open the driver's doors two more times. Then, remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will chirp when the settings are changed.

Step 4: Turn the ignition On.

It is crucial to understand that this method of programming a key fob works if you already have a functioning key. If you do not, then a dealership or auto locksmith will be required to program a new key for your spare subaru key in Fort Bliss.

After your key has been programmed it should be able to start your car within five seconds. To begin, make sure all doors are shut and the engine is off. Sit in the driver's seat and unlock the doors using the button for the door. Put the key into the ignition and turn it back to the first position. The electrical systems will be activated, however, the engine will remain in neutral. Repeat this procedure 10 times.

Step 5: Unlock the Driver's Door

Subaru provides a variety of high-end cars with key fobs, which can lock and unlock doors as well as start the car and defrost the windows. However, sometimes these gadgets do not function properly.

Find a locksmith or dealer to solve the issue. This will solve the issue and ensure your vehicle is safe.

First, open and close the door on the driver's side. Then, put the key in the ignition and switch it to the initial position. Then, return it to the off position. Repeat this ten times in an order as fast as you can. After the tenth repetition you should hear a chime.

Step 6: Press the Lock/Unlock button on the Driver's Door

If you need to replace the battery inside a Subaru key fob, the procedure is straightforward. The fob's case on the outside is opened. Then, use the flathead screwdriver open the internal case and remove the old battery.

After removing the battery, put in the new one and close the case. Sit in the driver's chair and then unlock all doors by using the door button control. Place the key in ignition and turn it to ensure that the electrical system is switched on, but the engine remains off. Repeat this 10 times in a line until you hear a chime on the instrument panel. This will put the system in programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button.

The annoying chirp which can be heard when locking or unlocking the Subaru Key Fob from outside of the vehicle can be distracting for certain owners. In some instances, you can disable the chirp by opening and shutting all doors while double-clicking the lock button on the key fob.

Close all doors including the fuel-filler lid, and switch off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime after this is done. The chirp signalizes that the lid of the fuel-filler door are locked. It is possible to alter the setting so that the doors lock automatically without pressing a button.

Step 8: Enter the 8-Digit Transmission Number.

Note down the first series of 8 digits and keep it in a safe place. Then, sit in the driver's seat, close the doors and turn the ignition to the first position. After 10 turns, your instrument panel should sound once.

The circuit board for transmitters is located inside the key fob case. There should be two or three sets of numbers (8-digits) on the circuit board. Follow the steps in the guide to register the code. For older models, this process may require a visit the dealer.