• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Unstick a Suzuki Ignis Key

suzuki alto key programming's quirky, cheap little city car gets a re-designed upgrade. It's no hot-hatch but it eats up the tarmac in rural and urban areas with gusto, while its clever turning circle makes city driving easy.

The new model is packed with clever safety and driver assistance features - including lane depart warning and a sleepiness detection alarm, which are welcome enhancements for long drives.

Steering Lock

The steering lock is a security measure which prevents your Ignis being taken when it's in gear. It's an important security measure however it can be a pain when you need to get someplace and you're not able to unlock the wheel. There are a few simple actions you can take to solve the issue.

Verify first that the ignition switch is set to "on". If that's the case, try to turn the key in the direction you were turning before the wheel was locked. It can be a bit tricky, but usually it is enough to unlock the wheels.

If the wheel does not unlock, you can spray a small amount of canned air into the ignition cylinder, to lubricate it. Be sure to wear eye protection before doing this so you do not get any canned air in your eyes! Liquid graphite is also a good option to make the cylinder more lubricated.

If none of them work then you'll need to replace the ignition assembly. Luckily, this is an easy part to locate at any auto parts store. Be sure to buy an identical replacement and compare it to the original before attempting to install it. Also, be sure to remove the cover that covers the ignition so you can be able to see and access the ignition.

Worn

The steering lock could bind the ignition switch and cause the key to get stuck. This is a security feature that is designed to stop your Ignis from moving away while the engine is running. If this happens, turning the steering wheel will unbind it.

In time, your Ignis key may wear out and become more difficult to turn. It may not occur as often as a defective switch, but it can occur. If this is the case, you should replace your key.

Also, find out if there is anything obstructing your Ignis key from entering the ignition cylinder. Sometimes, there may be debris or dirt that can be wedged inside and keep the key from turning in the way it is supposed to.

You could also try some lubricant and see whether it helps. There are a variety of lubricant you can purchase, so take a look around your garage or at an auto parts shop in your area to find one that will work.

Another option is to use a silicon "glow in the dark" key cover. These covers absorb light and release it when in dark or murky conditions. They also protect your keys from wear and tear. They are available on many suzuki key replacement near me models and are available on the internet or at a suzuki car key replacements dealership near you.

Bent

Over time and with frequent use, a key could get bent. The teeth of the keys may not connect to lock cylinders the same way. This can hinder the key from turning. In this instance, you will need to replace the key. If you have a spare key, it's a good idea to have it duplicated and keep it in a safe location.

Another possible cause is the ignition cylinder itself may wear out. The lock pins inside may become stuck together, preventing the key from moving completely into or out of the ignition cylinder. This where can i get a suzuki key made be fixed by replacing the cylinder but it is best to replace the cylinder prior to the key becomes stuck in the ignition.

If your Ignis lock is stuck despite trying easiest fixes It could be the right time to try lubricating your cylinder. Graphite or liquid graphite will assist the lock pins in being able to move more freely, which will unlock your key. You can find this in most auto parts stores. Be sure to put your Ignis in park before applying the lubricant. Do not try to manipulate the Ignis in order to release it from its binding. This could lead to more serious issues.

Broken

If you've tried a variety of methods to make a key remove its stick but it's still unable to move, the last resort is to use a oil to move it. You can buy this lubricant from a local auto parts store and apply it using an abacus or a cloth to the inside of the lock cylinder. Try again. Move the key backwards and forwards gently to spread out the grease. Try to massage it forward, but be cautious not to press too hard or you could damage the cylinder.

It is also possible that the key's internal circuitry will become unresponsive as time passes. It's not as common and usually means that you'll need to have the key duplicated to make room for another one.

In the end, the case of the case of your Suzuki key fob could get damaged or worn. This is more likely in the case of a low-cost keyfob that is a replica with the shell being made of plastic or rubber. The Key Crew may be in a position to transfer the internal circuitry of your old keyfob into an appropriate replacement case based on the situation. This will reduce the expense of purchasing an entirely new keyfob. We'll let you know the possibility for your situation when we call you to set up the service.