• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the old frame very easily. If you have double-paned windows that are held together by internal beading, Upvc Repair it will be more difficult to remove and replace the old panes. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you plan to attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor and could be trampled.

Once the glass has been removed from the window doctor near me, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap between the door and the window is large, you might prefer security screens that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a variety of issues that include sliding. A sagging uPVC window can cause issues with light, draughts and even security. It's important to take action when you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows so you can reach the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window doctor and test it for fit. If you're satisfied with the fit, tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges, you might require replacing the seal. Rubber seals may dry out and lose their elasticity over time, causing them to lose their tightness. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen. This is typically caused by screws that have loosened over time, but it can also be caused by the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and then perform a test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and floors that are wet. Water leaks from windows can not only cause degrading of the structure of your home but also hamper your efforts to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

It is a fairly easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking may need to be removed. When it is time to uPVC repair, you should be careful not to over-caulk. This can make your window more difficult to clean and lower its energy efficiency.

Check that any drainage holes do not have debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious cases you may need to think about replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the problem is with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open in a breeze It could be the hinges that are at fault. These are easily replaced by any competent DIYer and can be done within a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is an easy process but it can be easier to do if you have someone to help hold the frame in place.

Make sure that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us photos via our website will often resolve the problem. We are more than happy to offer assistance.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again due to wear and uPVC repair tear could become misaligned. This causes gaps to develop where the sash joins the frame. This can be easily fixed by giving them a good clean, but when they're beyond repair, it could be necessary to have them aligned or replaced. The interlock may also become disaligned. This is located on the hinge's side, and may need to be cleaned. In some cases it is possible to replace the hinges.

The next common cause of draughts is the window seals. These can become worn down or damaged over time and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another option is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures, and also reduce draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs your windows made of upvc will provide a great level of insulation and security for your home. It is crucial to realize that all windows have a life span and eventually, they will reach an point at which it is more cost-effective to replace them rather than fix them. If you are experiencing issues with your window made of upvc, it's best to consult an expert as soon as you can.