• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they do not rust or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the replacement will generally fit within the old frame very easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards will fall on the fabric rather than on the floor where they could be trampled upon and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will keep water and drafts from entering your property until a professional comes out to repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, over time, they can suffer from a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. It is crucial to act as soon as you notice your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can access the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close the window and check for fitting. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.

If you can't reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to loosen. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it could also be caused by the handle mechanism getting worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to shut the window and do an initial fitting. The corners of the sash need to align with the casing joint. If it isn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if you get up each morning to discover mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Based on the severity of the issue the old caulking may require removal before a fresh layer is applied. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris in them and ensure that the sill pan is properly angled to drain away from the window repairs. In more serious instances, you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leak is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it opens with an ease. They can be repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. It's very simple to change the hinges on a window, but it's easier if someone helps you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It also decreases the possibility of a window getting stuck and stop corrosion. It is recommended to do this once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges can also become disaligned as a result of wear, causing a gap between the frame and sash. If they're beyond repair, it could be necessary to have them realigned. The interlock may also become unbalanced. This is located on the hinge's side, and might require to be cleaned. In certain instances it might be necessary to replace these.

The seals may wear out or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor window repairs temperatures, and also reduce draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They can help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security to your home with regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and they may reach the point when it's more cost-effective to replace them rather than fix them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as you can.