• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and window repair are durable and long-lasting. As opposed to aluminium and timber they do not get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to ensure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames that were previously in use very easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also a good idea to lay down a dropcloth before you start working on the glass, so that any shards will fall onto the cloth instead of onto the floor where they can be trampled on and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is significant, you may need to consider security screens that has windows. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they are susceptible to a range of problems including sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to open the windows to reach the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've moved your hinges. If you are happy with the fit of the window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles may also become loose. This is usually due to screws that have been removed over time, but it could also be caused by the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and perform a test fit. The corners of the sash must be aligned with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. Water leaks from windows are not just a cause for destruction of your home's structure but also hinder your efforts to regulate the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the problem the old caulking might need to be removed before a fresh layer can be put on. It is important to remember that when it is about upvc window repair window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the problem is with the seal rather than the frame. This can be easily repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze It could be hinges at fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It is essentially a very simple process, but it's easier if you have someone to help hold the frame up.

Check that the uPVC hinges are open and closed in the proper direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are always happy to give advice.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges, also due to wear and tear could become misaligned. This can cause an opening to appear between the sash and the frame. This can be easily repaired by giving them a thorough clean, however if they are beyond repair it might be necessary to get them realigned or replaced. The interlock, which is on the hinge side of the window repair, can also become misaligned, again it is possible to give them a good clean, but in some cases it might be necessary to have these replaced.

These seals can wear down or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it is more cost-effective to replace them than to repair them. If you are having issues with your upvc windows, it is best to seek professional assistance as soon as possible.