• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Protects your vehicle against key cloning, and stops thieves from driving it with original keys. Our latest immobiliser connects to your vehicle's data network via CAN and the unique PIN code needs to be entered in order for the engine to start.

Ghost, unlike trackers, does not emit radio frequency signals and can't be identified by diagnostic tools. Also, it doesn't have any LED indicators or buttons that can give the impression of its presence in your car or van.

Anti-key cloning

The ghost immobiliser has been designed to stop key cloning and hacking. The device connects to the CAN data network in your vehicle and creates an unique pin code push sequence by using the buttons from the factory on your dashboard and steering wheel. This prevents the thief from being able to start your vehicle. If the wrong PIN code is entered, your car will not be started, making it impossible for them to drive away with your joy and pride.

A ghost immobiliser is a new technology that is extremely hard for thieves to beat. In contrast to physical deterrents such as wheel locks and steering locks that can be cut or stolen The ghost immobiliser is a discreet electronic device that cannot be detected by common thieves because it doesn't emit any radio signals and operates in a silent manner.

This next generation immobiliser is able to protect your car from a range of threats like cloned keys, key-hacking and even relay attacks. It is also able to stop the thief from adding the new key or replacing your ECU, as it will not allow the vehicle to start without entering the correct PIN code first.

In contrast to other immobilisers the ghost immobiliser 2 does not require any additional key fobs or remotes in order to operate. It can be deactivated via the driver's mobile with a simple application. This is ideal when you need to give your car away for valet parking, or for maintenance without keys.

The Autowatch Ghost-II is the latest version of our groundbreaking ghost immobiliser. It is designed to make it as simple and easy to use and yet be as secure as is possible. This is accomplished by connecting the Ghost-II with the vehicle's CAN data network. This means that there are no wires that can be hidden or easily spotted. It comes with built-in features that allow you to disarm the Ghost-II simply by connecting it to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is a new technique being used by professional car thieves to steal vehicles. Thieves are able to access your vehicle's OBD port with no more than a laptop, an application and a few cables, which can be purchased on the internet for less than PS50. Once they have access to your vehicle's OBD port, they can do whatever they like from changing fault codes and tuning your car to stealing your pride and joy in under a minute.

If you have an Ghost immobiliser installed, it will stop your car being stolen with this method by requiring that a unique PIN code sequence is entered on your key fob in order to start the engine and then drive away. It does this by communicating with the vehicle's ECU (Engine Control Unit) via the CAN Data circuit, and is completely undetectable to any code grabbing or RF scanning technology. It has a Service/Valet Mode that allows your vehicle to start without the PIN code.

You'll also require cables with OBD pins, which are connected to the CAN bus. These cables can be found on Amazon/Ebay for around PS50. You will also need an OBD cable that has OBD pins that are connected to the CAN bus. These can be purchased on Amazon or Ebay for around PS50. Then, you need to splice the cable into the wiring harness of your vehicle for example, the radio wiring harness.

Once the hacker has gained a connection to your vehicles OBD port, they can send diagnostics to the system at high baud rates which can cause CAN to crash and stop systems inside your vehicle from functioning. This could cause your car's engine to stall or shut down.

No additional remotes or key fobs required

The car immobiliser is an excellent piece of anti-theft technology utilized by millions of modern cars all over the world. An aftermarket immobiliser protects your vehicle with engine ECU software that prevents cars from starting if an untrue transponder signal is sent.

It is possible for thieves in the event that they have the code to disable an immobiliser, to disable it. The batteries in the majority of key fobs can be removed by prying it open which means that a burglar could make use of a simple tool to remove the immobiliser's internal circuit board and replace it with a blank. They will then be in a position to start your car.

The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is accomplished through a discrete, silent CAN data loop that is not detected by diagnostic tools, such as those used by high tech thieves. It does not include a traditional keyfob, which has an LED indicators, so it's inaccessible.

You may need to deactivate Autowatch's Ghost 2 protection at times, such as during valet parking or during a service. Ghost CAN immobilisers come with a feature called 'Service Mode,' which you can activate by just a click of a button on your phone. The car is still operated however, its maximum speed will be restricted to 36 mph for added security.

If you'd like more information about the TASSA accredited ghost vehicle immobiliser immobiliser, please contact us today to book a demonstration in our workshop. A member of our team will explain the process, and give you your Ghost 2 emergency card, installation certificate, and security assurance.

Simple PIN code Change Process

Ghost is a next generation device that secures your vehicle without cutting wires or putting in aftermarket key fobs. It connects directly to the vehicle's CAN data network and a personal PIN code is programmed in it via buttons on your steering wheel & the dash. The system stops engine start and can't be bypassed as no RF signals are emitted from the device. This makes it inaccessible to sophisticated scanning or code grabbing technology that modern thieves employ.

The PIN code sequence can be altered whenever you want to block previous drivers. It even comes with an override code in the event of forgotten sequences. When installing, the installer will demonstrate how to accomplish this. The system has a valet-mode feature that allows you to temporarily disable pin input sequences so that the mechanic or garage can service the vehicle without having to know the code. This is great for customers who want to hand over their vehicle for valet parking or service but don't want divulge the PIN sequence.

In contrast to Thatcham products which require additional key fobs to operate, Ghost is a discreet system that uses the buttons inside your vehicle to create an unique and interchangeable PIN code sequence. The sequence is entered using the app on your smartphone. No additional LED indicators are used, and your vehicle is protected without risk of being disabled.

Tested for each vehicle

In contrast to key fobs that require you to press buttons, a ghost immobiliser is discretely placed under your dash or steering wheel so that only you know it's there. The device is connected to your vehicle's CAN data network and the personalised PIN code is programmed into it using existing buttons on your vehicle. The system will not allow your vehicle to start until this code is entered. This means that thieves cannot duplicate your keys or access the OBD port to hack into your vehicle.

Ghost can be utilized in all vehicles that use electric vehicles motorhomes, vans, motorhomes and bikes. It's also extremely versatile and can be set to deactivate in various situations. It can be programmed to enter Valet mode, for instance, when the vehicle is transferred to a valet service or parking company. This means that your car can be operated within a pre-determined 30mph speed limit. The ghost immobiliser will activate itself once it is returned to your home.

Another fantastic feature is that the device can be reset to your personal PIN at any time. This is useful when you forget the code or the device is inoperable, meaning that it's effectively as good as new again.

The device is also completely undetectable by anyone who doesn't know about it is. It works by running through existing buttons on the dashboard of your car and on the steering wheel and utilizes the information they send to determine which button has been pressed. This makes it a secure and reliable security option that cannot be compromised by RF scanning, jamming or door lock pick sets.