• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You might need the key fob to be programmed by an auto locksmith or a Subaru dealer, based on how old your Subaru is. This is done by connecting a computer machine to your car.

To program your Subaru begin by unlocking the driver's door using the door button control, and then shut it. You will hear the chime and see the dome lights flash on the instrument panel.

Step 1: Locate the circuit board of your transmitter

There are a variety of ways to program your keyfob. First, you need to determine the kind of key fob you own. This can be done by inspecting the shape of the key fob, or by listening to the car's chime.

Once you have the information you require, you can begin the process of programming your key fob from home. You'll require a flathead and a metal key for this. Open the key fob by twisting. Then push the key in and release the battery from the tiny tabs that secure it. Replace the battery with a new one, and then put the key fob case back together.

Step 2: Disconnect the key fob case

The battery should be replaced. This is a smart idea as it could revive key fobs that have stopped working for a while. In some instances, the buttons on the key fob could be broken. If you can see that the button's metal contacts have come loose, you can try soldering them back in place to get them working again.

Before you start the process, ensure that your car's doors are shut and your ignition is off. Close the driver's door and then press your button 10 times in rapid succession. Then you'll hear the instrument panel chime and your dome light will flash. This indicates you're now ready to proceed.

Step 3. Insert the fob of your key into the ignition

There are many articles online that will give you steps on how to program a replacement or new subaru key locked in car key fob at home, but most of them are not very specific. Reprogramming an electronic key is best handled by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your Subaru with the engine off and all doors shut. Use the door button to unlock all the doors. Close and open the driver's door twice more. Remove and insert the ignition key (don't turn it) 10 times over 40 seconds. The system should chirp to confirm that the settings have changed.

Step 4: Turn the Ignition On

Before proceeding with this method of key subaru fob programming, it is important to note that this procedure only works if you own one working key already. If you don't you can find an auto-locksmith or dealer who will be required to program the key fob for your Subaru Fort Bliss.

After the key is programmed, it will be in a position to start your vehicle in about 5 seconds. Start by closing all doors and turning off the engine. Assume a seat in the driver's chair and unlock the doors by pressing the door button. Put the key into the ignition and turn it to the first position. The electrical systems will be activated however, the engine will remain off. Repeat this procedure ten times.

Step 5 Step 5: Unlock Driver's Door

Subaru offers a variety of high-end cars with key fobs, which can lock and unlock the doors and even start the car and defrost the windows. However, at times, these devices stop working properly.

Contact a locksmith or a dealer to solve the issue. This will resolve the issue and make sure that your car is safe.

To accomplish this, open the driver's door, then close it. Then, place the ignition key in and change it to the off position. Then, turn it back to the off position. Do this ten times in an order as fast as you can. After the tenth rep, you should hear a chime.

Step 6: Press the Lock/Unlock Button on the Driver's Door

If you are looking to replace the battery in a Subaru key fob, the process is simple. First, open the exterior fob casing. Utilize a flathead tool to pry the inside of the case and remove the batteries that were in there.

After removing the battery, replace it with the new one. Close the case. Then, sit in the driver's seat and unlock all doors using the door button control. Place the key in ignition and turn it so that the electric system is on, but the engine is off. Repeat this ten times in a row until you hear the chime coming from the instrument panel. This puts the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button

The irritating chirp that can be heard when you lock or unlock a Subaru Key Fob from outside of the vehicle can be distracting for certain owners. In certain situations, the chirp can be disabled by opening and closing all doors and a double-click of the lock button on the key fob.

Switch the ignition off and close all doors, as well as the lid for the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime once this is done. The chime signals that the fuel-filler lid and door are locked. It is possible to alter the setting to make the doors lock automatically without pressing a switch.

Step 8 Step 8: Enter the 8 Digit Transmitter Number.

Keep the first 8 digits of the code in your mind. Now, climb into the driver's seat, shut the doors and turn the ignition to the first position. After 10 turns, your instrument panel will chime once.

Then, open the key fob case and locate the circuit board that controls the transmitter. The circuit board should contain one or two 8-digit numbers. Note the sequence that starts with the first number, and follow the directions in this guide to register the code with your vehicle's system. For older models, this procedure may require a visit the dealer.