• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this case, you will need to locate some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

If you're planning attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not on the floor, where they could be trampled under.

It's a good idea to tape the gap once the glass is removed. This will keep drafts and water from getting into your property until a professional arrives to repair the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues such as sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. It is crucial to act when you discover that your uPVC windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need to open the window to access the frame. Then, uPVC window repairs using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for fitting. If you're satisfied with the fit, you can tighten the screws to ensure they remain in place.

If you can't reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are waterproof and secure from draughts.

uPVC handles could also loosen. Often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to close your window and do an experiment fit. The joints at the corners of the sash windows repair must align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is essential to take action if you wake up every morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on the severity of the problem the caulking used previously may require removal before a fresh layer is applied. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal rather than the frame. This can be easily fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze it could be hinges at the fault. They can be easily replaced by any competent DIYer and can usually be completed in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. Changing a window hinge is essentially a very simple process, but it's easier if you have someone to help hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular manner or because of inadequate installation at the factory. This can often be resolved by sending us a photograph via our website and we will be pleased to offer you suggestions.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become disaligned as a result of wear, causing an opening where the sash and frame meet. If they are damaged beyond repair, it could be necessary to have them realigned. Second, the interlock can also become disaligned. This is located on the hinge's side, and may need to be cleaned. In certain instances it might be necessary to replace them.

The next common reason for draughts is window seals. These are prone to wear or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and will reduce the risk of draughts.

Another, and most effective methods to reduce draughts is by using an draught excluder. These are typically made of fabric filled with some kind of filler. They can be put on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repairs, your upvc windows will continue to provide excellent security and insulation for your home. However, it is important to recognize that all windows have a lifespan and they may reach the point when it's more efficient to replace them than fix them. If you encounter any issues with your window made of upvc you should consult a professional as soon as you can.