• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. However, if you have double pane windows that are anchored by internal beading, it will be more difficult to remove the old panes and put in new ones. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from getting into your home until a professional is able to fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you may think about a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they can suffer from a variety of issues, including sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll have to open the window so that you can access the frame. Then, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and verify the fitting. If you're satisfied with the fit of your window, you can tighten screws to hold them in place.

If you can't reposition the hinges, you might require replacing the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it can also be caused by the handle mechanism wearing out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and do an experiment fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and wet floors. Windows that leak water do not only lead to the destruction of your home's structure but also hinder your efforts to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how serious the issue is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double glazed window repairs-glazed window, it is more likely that the problem is with the seal rather than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze It could be the hinges that are at the fault. These are easily repaired by any skilled DIYer and can usually be done within a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to replace a hinge on a window however it is easier if someone else helps you to hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can do this by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue could be caused either by opening the window repair (click for more info) improperly or by a poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to provide assistance.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to operate and close more smoothly. It also decreases the chance of windows getting stuck and stop corrosion. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. First, the hinges due to wear and tear may become displaced, which will cause an opening to appear where the sash joins the frame. These can be easily repaired by giving them good cleaning, but if they are beyond repair it may be necessary to get them realigned or replaced. In addition, the interlock could also become misaligned. This happens on the hinge side and might require to be cleaned. In some instances it is possible to replace them.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures, and reduce the risk of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder. These are typically made of fabric which are filled with a type of filler. They can be placed on the top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repair, your upvc windows will provide an excellent level of insulation and security for your home. It is crucial to recognise that all windows have a life span and eventually, they will reach a point where it is more efficient to replace them than repair them. If you are experiencing issues with your Upvc window it is recommended to speak with a professional as soon as possible.