• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is important to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you plan attempt to remove the glass panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could be affected by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts and even security. It's important to take action when you notice your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to get at the frame. After that, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to lose their tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. Most often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. You'll first need to close the window and do an experiment fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

It is crucial to act if you wake up every morning to discover mouldy walls and wet floors. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window repairs. In more serious situations, you may have to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double glazed window repairs-glazed glass, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it blows open with the breeze. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It's very simple to change a window hinge however it is easier if someone helps you to hold the frame.

Check that the uPVC hinges are closed and open in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain manner or because of improper installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be pleased to offer you suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also reduce the chance of windows sticking and prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges may also become unbalanced due to wear, causing gaps where the sash meets frame. They can be repaired by giving them a good clean, but if they are beyond repair it might be necessary to have them aligned or replaced. Second, the interlock can also become misaligned. It is located on the hinge's side and might require to be cleaned. In some instances, it may be necessary to replace these.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and lessen the risk of draughts.

Another, and most effective ways to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes filled with some sort of filler and can be placed on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs windows made of upvc will provide a great level of insulation and security for your home. It is essential to remember that all windows eventually become worn out, and it could be more cost-effective to replace them than to repair them. If you have any problems with your Upvc window, it's best to consult an expert as soon as you can.