• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They don't rot or rust like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. It is essential to take the time to ensure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and typically fit into old frames very easily. However If you have double-pane windows that are held in place by internal beading, it'll be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance you'll need find some plastic spacers that help the new pane to fit correctly into the frame of the window.

If you are going to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards fall onto the fabric instead of onto the floor where they can be trodden under and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from entering the property until a professional can come out and fix the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a number of problems such as sliding. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to get at the frame. With an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and test it for fitting. If you are happy with the size of the window, tighten the screws to secure them in place.

If you cannot reposition the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is typically caused by screws that have loosened over time, but it could also be due to the handle mechanism wearing out. It's fairly simple to repair a loose uPVC handle. The first step is to close the window and then perform a test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it's important to take action. Windows that leak water do are not just a cause for destruction of your home's structure but also hinder your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on the severity of the problem the caulking used previously might need to be removed before a fresh layer can be applied. It is essential to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze It could be the hinges that are at the fault. Any competent DIYer can replace hinges in just a few minutes.

Like any mechanical part hinges will wear out over time. It's easy to replace a hinge on a window repair however it is easier if someone helps hold the frame.

Check that the uPVC hinges are open and closed in the proper direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should open.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or by poor installation at the factory. This can often be resolved by sending us a picture on our website. We will be more than happy to give you suggestions.

Regularly lubricating hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more easily. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also become disaligned as a result of wear, causing gaps where the sash and frame meet. If they are damaged beyond repair, it could be required to realign them. In addition, the interlock could be unbalanced. This happens on the hinge side and could require to be cleaned. In certain instances it might be necessary to replace the hinges.

The next most common reason for draughts are the window seals, these can become worn down or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They can keep your home warm by blocking cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it is cheaper to replace them instead of fixing them. If you are experiencing issues with your Upvc window, it's best to consult a professional as soon as you can.