• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from unnecessary repair costs and seals also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers that will aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the property until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. However, over time they may be afflicted by a variety of issues like sliding. A sagging window in uPVC can cause issues with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need open the window to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and verify the fit. If you're happy with the fit, you can tighten the screws to ensure that they stay in the right place.

If you are unable to move the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it can also be due to the handle mechanism wearing out. Fortunately, it's easy to repair the handle of a window that is loose yourself. The first step is to close your window and do an experiment to ensure that it fits. The corners of the sash need to align with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the problem is, the old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is related to the seal, not the frame. This can be easily corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens in an ease. They can be easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung upvc window repair near me windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is an easy procedure, but it is easier to do if you have someone to assist in holding the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or due to poor installation at the factory. This issue can be fixed by sending us a photo via our website and we will be happy to give you suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. First, the hinges because of wear and tear, could become misaligned. This will cause an opening to appear where the sash joins the frame. If they're beyond repair, it may be necessary to have them realigned. In addition, the interlock could also become disaligned. This happens on the hinge's side and might require to be cleaned. In certain instances it is possible to replace the hinges.

The seals may wear out or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

One of the most effective methods to reduce draughts is by using an draught excluder. These are typically fabric tubes filled with some sort of filler and can be put on the top of your windowsill. These will help to keep cold air out and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it could be cheaper to replace them instead of fixing them. If you are experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as possible.