• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good repair.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the old frame very easily. However If you have double pane windows that are secured by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this situation you'll need source some plastic spacers that help the new pane to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you start working on the glass so that any fragments of glass fall onto the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

It's a good idea to seal the gap after the glass has been removed. This will stop drafts and water from getting into your property until a professional arrives to repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is large, you may be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could develop a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts and broken even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll have to open the window so that you can get to the frame. Then, remove both the hinges on the top and bottom with a screwdriver and broken adjust them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. Most often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to close the window and perform an experiment fit. The corners of the sash must be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is important to take action if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any competent DIYer. Based on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be applied. When it comes to uPVC repair, you must avoid over-caulking. This will make your window harder to clean and reduce its energy efficiency.

Make sure that the drainage holes are free of debris inside them and that the sill pan is properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens in an ease. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical component, hinges can wear out over time. It's very simple to replace a hinge on a window, but it's simpler if you have someone to help hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window repair should be opened.

The problem can be caused either by opening the window incorrectly or due to a poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to provide suggestions.

It is also essential to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more easily. It can also reduce the possibility of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. Firstly the hinges, again due to wear and tear may become displaced, which will cause a gap to form between the sash and the frame. If they're beyond repair, it could be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window, may be misaligned. Again, it's possible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air to escape. Installing high-quality weatherstripping can help prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be put on top of your window sill. These will help to keep cold air out and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. So, if you're experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as possible.