• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Almost all customers agree that the upvc replacement window handles are simple to install and feel like high-quality. It's crucial to understand that the handle you choose for your window must be appropriate for your.

The height of the step is the most crucial factor. This is the distance between the handle and the frame or base. Other considerations include lockable styles and mechanisms.

Replacement parts

You can purchase a variety of replacement upvc handles. They come in a variety of styles and colors so there's bound to be something that fits your existing windows. It's easy for you to buy something on impulse, especially when the handle is damaged. So it's best to do some research before buying a replacement. The first thing to think about is what kind of upvc handle do you currently have and what the difference between kinds is. The table below outlines the most popular handles to help you identify the one that is suitable for your upvc windows.

Espag handles are the most commonly used and are used on the majority of modern double-glazed windows. They are usually fitted to the frame by two screws that are screwed in from both sides.

The spindle bar on the back can be different in size, and will determine if they're left-handed or uPVC Replacement Window Handles right-handed. It's important to take the measurements of the handle you need to ensure you purchase the correct replacement.

The arm is attached to the frame by two bolts, uPVC Replacement Window Handles just like the Espag handle. However, the handle is curved at a low angle so that it doesn't damage your blinds. This is a great option when you want the handle to blend in with your blinds and upvc windows.

Cockspur handles are similar to Espag handles, however they have a nose that closes over a wedge which sits on the window frame. This kind of handle is often found on older windows made of upvc and also on some wooden windows.

On casement windows tilt and turn handles can be operated by turning the handle or pressing the top of window. This lets you open the window from inside and clean it from outside without having to climb a ladder or walk across the garden fence. They are also a great alternative for those with limited mobility. They are a great way to improve security and accessibility within the home.

Hints and tips

A lot of people will need to replace their uPVC window handles at some point. If this occurs it's best to be aware of a few tricks and tips that can help the job go as smoothly as it can.

The first step is check what type of handle you have at home. Depending on the kind of handle and the locking mechanism, it could be necessary to replace the lock and handle. If the roller cams and shoot bolts (espags) are stuck or are seizing up, you'll have to replace them along with the handle.

Thankfully, most uPVC handles are very similar and conform to industry standards for sizing, which makes replacing them a fairly easy process. The first step is to remove the screw covers from the handles, which are typically pozi-drive screws. Once they are removed, you can take the handle apart.

When you have the handle split it is recommended to make an inventory of how much of the spindle is protruding from the base of the handle. This will allow you to measure the length of the spindle to determine the replacement handle. To do this, take a measurement of the square peg sticking out from the base of the handle and use that as a guide.

This is especially true for inline uPVC windows handles, as they are always straight and only open left or right. They aren't able to function in the middle. It is a good idea if you're not sure of the kind of handle you have in your home, to borrow a handle and see how it works.

You can also determine the hands of a uPVC window by observing how the handle spins when it is in use. Handed handles can be turned either clockwise or counter-clockwise. If you're unsure then you can always ask someone else to open the window with the handle and figure out how it operates in that way.

Take a measurement of the spindle

Choosing the correct replacement handle for your windows could be difficult as there aren't all handles that are the same size. It is essential to measure the spindle accurately when fitting the new handle. This will ensure that the handle fits. There are a variety of uPVC handles that operate in various ways. It is important to identify the type you have and the locking mechanism you have.

Espag handles have a spindle that extends from the rear of the handle and then into the lock gearbox inside the window frame. When you turn the handle, it will turn the lock inside the gearbox, allowing you to open the window. They are typically used on uPVC casement windows and they can be locked with keys to offer additional security.

Cockspur handles are equipped with a "nose" that is closed over a wedge-shaped striker block on the frame. They are usually found on older double-glazed uPVC windows. They are also easy to use and can be locked using keys. They can be somewhat more difficult to find replacements for since they are not as common as the espagnolette handle.

If you have a tilt-and-turn uPVC then you'll need a replacement handle with a different locking mechanism. The handle can tilt the window, and allow it to be turned back and forth in order to fully open it. It is essential to make sure that the handle you select has a spindle length at least 55mm, or it won't be able to penetrate the window frame.

You can use the same procedure to take off and replace this kind of uPVC handle, however you will need to be cautious when you remove the old one. You may have to open the window a little wider than usual to ensure that you reach both screws that are fixing it to the frame. Once you have put in your new uPVC handle and verified that it is in the proper position, then you can tighten the screws, and test the lock to ensure it is working properly.

Fit the new handle

Once you have the correct handle replacement, it will simply screw into place. It will require a screwdriver and an electric one may be more convenient. It is crucial not to overtighten the screws while screwing them in. This could cause the handle or knob to swell.

Inserting the spindle is the second important step to attach the new handle. The spindle is a part which runs through the handle to operate the locking mechanism of the window. It is crucial that it is installed correctly since this will ensure the window is able to be closed and opened with confidence.

There are a variety of different kinds of uPVC window handles. There are several types of window handles made of uPVC.

Espagnolette Handles are inline handles which can be used to open tilt and turn windows.

Cranked Espagnolette Handles - these are similar to the inline handle but have a curvaceous design that is ideal for windows in hard-to-reach locations.

Tilt and turn handles They are used to operate the opening mechanisms and closing mechanisms when tilting and move windows.

These are the most commonly used and the majority of uPVC windows have these in their place. They are commonly called 'Bay Windows' in the UK.

It can be very frustrating if your uPVC handle fails. There is no need to change the entire uPVC window because of a broken window handle. There are several simple steps you can take to fix and replace a broken uPVC window handle.

By identifying the kind of window you have, calculating the spindle length and purchasing the replacement handle, you can fix the broken window handle. It is crucial to be patient and prioritize security when working with windows and tools but this is a straightforward task. It can be the difference between having a safe and secure home, or an insecure open window! If you have any questions or would like to speak to a professional about replacing your window handle, call Bridgewater Glass. We have a team of experienced and knowledgeable professionals who are able to assist you with any problems you might be having.