• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

It is important to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation, you will need to find some plastic spacers that will help the new pane to fit properly into the frame of the window.

If you are going to try to remove the window panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any shards will fall onto the fabric rather than on the floor, where they could be trodden under and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will stop drafts and water from entering your home until a professional arrives to fix the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the distance between the window and the door is significant, you may need to consider an alarm system that includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from getting worse.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows so you can reach the frame. With an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you're satisfied with the fit, tighten the screws until they remain in the right place.

If you are unable to move the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have become undone over time, but it can be due to the mechanism of the handle wearing out. It's relatively simple to repair a loose uPVC handle. First, you'll need close the window and perform an initial test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

It is crucial to act if you awake each day to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or not present.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

Check that any drainage holes have no debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. Again this can easily be repaired by an upvc Window Repair window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease it could be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part hinges will wear out over time. It is very easy to replace a hinge on a window however it is simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused by opening the window improperly or by a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are always happy to offer suggestions.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges can also be misaligned due to wear, creating gaps where the sash meets frame. If they're beyond repair, it could be necessary to have them realigned. In addition, the interlock could also become unbalanced. It is located on the hinge's side, and might require to be cleaned. In some instances, it may be necessary to replace these.

The seals may wear out or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually wear out and it may be more cost-effective to simply replace them rather than repair them. If you encounter any issues with your Upvc window, it's best to consult an expert as soon as you can.