• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When It's Time to Repair Windows

If your windows require repair, it's important to work with care. Wear safety glasses and gloves to protect yourself from glass shards.

A quick fix for a broken window is to apply a plastic covering over the crack. This will keep insects, snow, and rain from getting into the home.

Cracked Glass

Cracked window glass not only make your home appear less appealing, but it can let drafts and other elements into the home. It doesn't matter if cracks are caused by an impact like soccer or a baseball or a stress like the sudden temperature change, but it is important to have them repaired as quickly as possible to avoid further damage and ensure that your windows are functioning correctly.

If your window is cracked but not broken, a quick solution is to use clear tape to cover it. This is a cheap and simple solution to protect your window from water, dust bugs, and other debris. It also helps keep out the weather.

If the crack is getting larger or is getting more large, it is recommended to consult with a professional. A skilled glazier will be able to determine the cause of the crack and recommend an appropriate repair method.

Impact cracks are the most common window breakage. They typically occur when a solid object strikes your window with enough force that it breaks. These cracks usually have a starburst of lines and broken pieces. They can be hazardous if they become loose. The crack could compromise the gas that is between the panes of your double-pane window and lower its energy efficiency.

Stress cracks are another kind of crack that develops as a result of extreme temperature fluctuations and other environmental factors. These cracks start around the edges of your window and eventually enlarge into full-blown breaks.

A more serious but possible crack is the pressure crack. It is a curvy curve that extends across the window on one or more sides. It could be caused by high or low pressure which can cause the glass to expand or contract.

If you're willing to go further than nail polish and tape there are alternatives to fix cracks in your window glass. Glass Repair Film, while more expensive, will provide your windows with more protection and durability. If you prefer to go the DIY route epoxy is a sturdy adhesive that can fill cracks to prevent further damage and make your window appear like it has never had a crack at all!

Leaking Windows

If you notice a damp area under your window, or the wood around it is soft or decaying, it may be time to repair your windows. Mildew and mold thrive in excessive moisture, which can lead to numerous issues in your home. They can reduce the quality of air inside, contribute to sagging drywall and even worsen allergy symptoms. If not checked, they could cause structural damage to your home.

It is recommended to contact a professional if the water is visible or comes from the outside. Leaking windows are among the leading causes of mold and structural damage So don't leave them untreated.

In many cases caulking is a great option to stop leaks. Before you apply the new caulking, you'll need to clean the area and get rid of any caulking you have already applied.

It is also important to examine the weep holes on the frame to make sure they're not blocked by debris. They're designed to drain off excess rainwater, but they can get blocked by insect carcasses and other debris as time passes.

If you have double-paned windows You'll also have to check the seal between the glass and the metal frame. This creates a gas barrier between the panes, making the windows more energy efficient. As time passes the seal may wear out and allow water to enter your home.

The water stains on the walls and ceiling are another indicator of a leak. The drywall will turn discolored once it is saturated with water. You might also find peeling paint, which is a result of water destroying its adhesive properties and pulling away from the wall.

Faux Muntins & Mullions

In the past muntins (or glazing bars, as they are called in the UK) were a way to separate and held the panes of classic multi-paned windows. Since larger expanses of glass that were tempered became available after WWII, they fell out of fashion. Today, they're mainly used as a decorative element in some older homes.

Most of the time it is the case that a small or even a single group of these wooden supports could be damaged by wind or rain leaving cracks in the window. The good thing is that you are able to repair the majority of these rotting or brittle parts.

First, use a rag to clean the affected areas. Use ammonia-based cleaning products that doesn't leave any residue. Take off any rotting or loose pieces and trim the intersections of the painted vertical and horizontal window muntins using an exact knife. After you've cut the intersections, seal the lower portion of the window frame using painter's tape. Now, you're able to apply a thick layer of white paint, paying particular attention to the areas that were lightly coated on the first go. Allow the paint to dry completely before taking off the tape and applying a second coat.

If the issue is more severe like an hourglass-shaped fracture in the middle of the window, it's recommended to replace the sash. In these situations it's crucial to find an alternative window that is in line with the design and size of the present one.

Installing a grid window is a more affordable option. These windows have a full pane of glass, with a series of muntins attached to the surface, giving them a divided look. They are not as energy efficient as traditional windows.

Installing a drip cap will stop water from getting into the window frame. There are a variety of these drip caps made of aluminum at most home centers for about $20. These are much easier to install than replacement window sashes, and will provide the same function as a genuine mullion, or muntin.

Broken Sashes & Frames

A broken window sash should be a signal that you need to seek help. If left unchecked the broken sash may cause water leaks, wood rot and more serious issues with the frame and sill. If you have a broken sill, you must replace it as soon as you can to ensure that your window is properly sealed and working.

The issue is usually caused by worn-out or improperly installed cords. Luckily, replacing them is quite simple and can be done in all double-hung windows. To begin, you'll need remove the tabs made of metal that secure the sash. Push up on the side of the sash (it isn't important which side) and then pull toward the opposite side in order to pull it out. It is important to remove the strip of separation that divides the sash from the other so you can access the area where the sash cords are located.

After you've removed the sash, take the time to look at its metal tabs and compare them to the ones on the new sash. If they're different, it can be difficult to put the new sash into its proper place and could affect how well the sash operates. Fortunately, this issue can be rectified by placing the tabs in their correct positions on the new window.

You'll need to check the frame of your window, too to look for any signs of damage or rot. It's a good idea perform this inspection regularly since the wood shrinks and gets worn down over time, particularly after exposure to the elements. You should repair any visible damage as quickly as you can to avoid a larger problem.

If your upvc window repairs near me frames are deteriorating they can be treated with a homemade preserver created with half mineral spirits and boiled in linseed. After the treatment has dried for a total of two days, you can then re-finish your frames using a high quality latex paint. A fresh coat of paint can help to protect your window from the elements too.