• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Many customers agree that replacement handles made of upvc are easy to install and feel great. But it's important to understand that the kind of handle you select is the one that's right for your window.

The primary factor is the step height that is the distance from the nose of the handle to the base or frame. Other considerations include lockable styles and mechanisms.

Replacement parts

There is a variety of replacement upvc window handles available for purchase. There are numerous styles and colors to choose from, so you're sure to find something that is compatible with your existing windows. It's easy for you to buy something on impulse particularly when the handle breaks. Therefore, it is best to do some research before purchasing a replacement. First, you must be aware of the type of upvc handles you have and replacement handles for upvc windows what the differences between them. The table below lists the most popular handles so that you can find the right one to fit your upvc window.

Espag handles are the most common and are commonly found on modern double glazed windows. They are typically attached to the frame with two screws that are screwed into the frame from both sides.

The spindle bar at the back can be different in size, and will determine if they're left-handed or right-handed. It is essential to know the measurements of the handle you have to ensure that you order the right replacement.

Typically fixed by two bolts similar to the Espag handle, but they have a low projection from the frame, which means that the arm won't poke through your blinds. This is a good option when you have blinds on your upvc windows and want to make sure the handle will blend in with the blinds.

Cockspur handles resemble Espag handles, however they have a nose that closes over a wedge which rests on the frame of the window. This type handle is found on some older wooden and Upvc windows.

On casement windows, tilt and turn handles can be operated by turning the handle or pressing the top of the window. This opens the window from the inside and allows you to clean the outside without needing to step out onto a ladder or walk over the garden fence. These are also an excellent option for those with limited mobility, and can increase security and accessibility in the home.

Tips and suggestions and

Many people will have to replace their uPVC window handles at some point. It is important to know a few tips and tricks that will aid in the process.

Find out what kind of handle is located at your residence. Depending on what the handle is attached to and what locking mechanism it uses it could be necessary to change the entire handle and lock. If the roller cams and shoot bolts (espags) are stuck or are seizing up, you'll have to replace them, along with the handle.

Fortunately, the majority of uPVC handles are identical and follow industry standard sizes, making replacing them a fairly easy process. The first step is to remove the screws from the handles. These are usually pozi-drive screws. Once they are removed, you can then take the handle apart.

If you've got the handle separated from the handle, it's a good idea to make a note of how much of the spindle protrudes from the base of the handle. This will help you measure the length of the spindle to determine a replacement handle. To do this, simply determine the length of the square peg that sticks out from the base of the handle and use it as a reference.

This is particularly important for inline uPVC window handles as they'll always be straight and can only open left or right, and won't operate in the middle. It's a good idea if you are not sure what type of handle you have at your home to borrow a handle and see how it works.

You can also determine the hands of a uPVC window by watching the way the handle turns when it is in use. Handed handles can be turned either clockwise or counter-clockwise. If you're unsure, you can always ask someone else to open the window with the handle, and figure out how it operates in this manner.

Measure the spindle

The selection of the right replacement handle for your windows can be a bit difficult since there aren't all handles that are the same size. It is essential to measure the spindle accurately when fitting a new handle. This will ensure that the handle is suitable. There are many different types of uPVC handles that operate in various ways. It is essential to determine which one you have, as well as the locking mechanism you are using.

The spindle on the espag handle extends out from the handle's rear and is attached to the lock gearbox in the window frame. When you turn the handle, it then turns the lock in the gearbox and opens the window. They are used on uPVC windows with casement and can be locked with keys to increase security.

Cockspur handles are usually found in older double-glazed uPVC window frames. They are characterized by an "nose" that closes over a wedge-shaped striker block. They are also easy to use and can be locked using keys. These handles can be a little more difficult to locate replacements for as they aren't as well-known as the espagnolette handle.

If you have an open tilt and turn uPVC window then you will require a particular type of uPVC replacement handle that has a different locking mechanism. The handle can tilt the window, and allow it to rotate back and forth to fully open it. It is essential to ensure that the handle you pick has a spindle size of at least 55mm or commercial it will not be able to reach into the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you will have to be careful when removing it. You may have to open the window a bit larger than usual to ensure that you can get to both screws fixing it to the frame. Once you have fitted your new uPVC handle and checked that it is in the proper position, you can tighten the screw covers and test the lock to ensure it works properly.

Fit the new handle

Once you have the correct replacement handle, it will be easy to screw it into place. It will require a screwdriver and an electric one might be more convenient. It is important to not overtighten the screws when screwing them in. This could cause the handle or knob to warp.

Inserting the spindle is the second crucial step to install the new handle. The spindle is the part that is inserted into the handle to control the locking mechanism in the window. It is essential that the part fits correctly because this will allow the window to be opened and shut securely.

There are many different kinds of uPVC window handles. They include:

Espagnolette Handles are inline handles that can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curvaceous shape that can be useful for hard-to-reach windows.

Tilt and turn handles These are used to control the opening mechanisms and closing mechanisms for tilt and move windows.

These are the most commonly used and the majority of uPVC windows have these in the first place. They are often called 'Bay Windows' in the UK.

If your uPVC window handle is damaged, it can be a major hassle. There isn't any need to replace the entire uPVC windows because of a broken handle. There are many easy ways to fix and replace a broken uPVC window handle.

By identifying what kind of window you have, calculating the length of the spindle and buying the replacement handle, you can quickly repair your broken window handle. When working with windows or tools it is essential to prioritize safety. However, this is a relatively easy task. It can be the difference between a secure and commercial secure home or a unsecured, easily opened window! If you have any questions or would like to speak to a specialist about replacing your window handle, call Bridgewater Glass. We have a team that is knowledgeable and experienced to assist you with any problem.