• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass so that any shards will fall onto the fabric rather than on the floor where they can be trampled on and cause further damage.

It's a good idea to seal the gap after the glass is removed. This will stop drafts and water from entering your home until a professional arrives to repair the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap between the window and the door is large, you might prefer an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. In time, they could be affected by a variety of issues such as sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll need to open the window to get to the frame. With an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of your window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles could also loosen. This is often caused by screws that have become undone over time, but it can be due to the handle mechanism wears out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and perform a test fit. The joint at the corners of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue the caulking used previously might need to be removed before a fresh layer can be put on. It is crucial to remember that when it comes to upvc window repairs (Learn Even more) you should avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you might need to consider replacing the window repair.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the home.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it blows open with a breeze. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is essentially a very simple procedure, but it is easier if you have someone to help you hold the frame in place.

Verify that the uPVC hinges open and close in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you advice.

It is also crucial to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also be misaligned due to wear, causing a gap between the frame and sash. If they're beyond repair, it may be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window, can be misaligned. Again, it's possible to just give them a clean but in some cases it might be necessary to have these replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the risk of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is crucial to recognize that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than fix them. If you are experiencing issues with your Upvc window, it's best to consult a professional as soon as you can.