• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the old frame very easily. However, if you have double pane windows that are held in place by internal beading, it will be more difficult to remove the old panes and put in new ones. In this case you'll need find some plastic spacers to aid the new pane in being able to fit correctly into the window frame.

If you plan attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled under.

It's a good idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your home until a professional is able to fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you may think about a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. However, over time, they can suffer from a variety of issues like sagging. A sagging window can cause problems with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need open the window to access the frame. With the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for fitting. If you're happy with the fit, tighten the screws until they remain in the right place.

If you cannot reposition the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and safe from drafts.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could be caused by the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and perform a test fit. The corners of the sash must align with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also hamper your efforts to regulate the temperature within your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and could reduce your energy efficiency.

Check that any drainage holes do not have debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with a breeze, it may be the hinges that are at fault. They can be easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier when you have a person to help you hold the frame in place.

Make sure that the uPVC hinges are closed and open in the proper direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window incorrectly or a faulty installation in the factory. Sending us a picture through our website can often resolve the problem. We are happy to provide advice.

It is also important to lubricate the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges can also be disaligned as a result of wear, which can cause an opening between the frame and sash. These can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them aligned or Repairs to uPVC Windows replaced. In addition, the interlock could be disaligned. This is located on the hinge's side and could require to be cleaned. In some instances, it may be necessary to replace them.

The next common reason for draughts is window seals. They can become worn down or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will lessen draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it could be more cost-effective to simply replace them than to repair double glazing window them. So, if you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.