• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Regularly inspect the window sashes for signs of damage, mildew and mold. You can avoid the cost of repairs in the future by catching the issues early, before they become out of control.

The sash is the interior framing that moves vertically either up or down in windows that are open. This article will teach you how to perform several simple repairs to the Sash window Repair.

Weather Stripping

Wooden window sashes are a great way to add a classic look to your home. They are also sturdy and last for a long time when they are maintained properly. They can, however, become damaged or degraded with time due to exposure or normal wear and sash Window Repair tear. Sash repair specialists can restore windows to their original state and maintain their appearance much longer than replacement windows.

The first step for repair sash window damage is to fix weather stripping. It's found on both the sash and frame. It could cause drafts if damaged or is loose. To fix it, start by determining the brand of your window and glass manufacturer date (etched in the corner of the glass or on the aluminum spacer between panes). Remove the sash and mark its width and height so that you can purchase replacement weather stripping that matches.

Next, remove the sash and set it on a table so that you can reach all four sides. If your sash is double-hung, you'll need to remove the weights and the ropes that go with them, which should have fallen into the pocket of the jamb liner. After removing the sash with the utility knife, take off the weather stripping from the old sash by hand or with a putty blade.

Once the sash is clear it is time to replace the parting stops. These are long pieces that divide the sashes. Pam likes to replace them with standard 1/2-inch-by - 3/4-inch window trim from the lumberyard, however you could also use a piece of scrap wood.

After removing the stopper for the parting and trimming it to length after which, apply a thin layer of glazing compound over the bottom of the sash. Smooth the compound using your putty tool and allow it to dry for at least a day. After it has fully dried and dried, apply a second coat of acrylic latex paint. This will protect the putty, and give your sash a fresh look.

Sash Hardware

The hardware that supports window sashes can wear out with time and use. This can result in windows or doors that is difficult to open or close. It's good to know that replacing and fixing this hardware is usually easy and affordable. If you're having difficulty opening the sash, spray some lubricant into the jamb channel. Then, you can slide the sash up and open to see if this resolves the issue. If the problem persists, it is most likely to be due to the sash's balance. It is necessary to take off the window sash to get access to this part of the hardware.

Window sashes need to open and close with little effort. However, this could be difficult if the weights are worn out or the sash-to-rail connecting rail isn't coated. This issue can be due to various reasons, including the lack of maintenance or an unmatched weight rating.

If the hinge arms on the window begin to move, this could cause the sash to drag, and then eventually to hit the frame in the opposite corner (Photo 1). To correct the issue, make sure that the sash is aligned in the frame opening and then remove it. If the sash is fixed to the hinge arm, take it off the hinge and replace it. (Photo 2). Install the new sash next (Photo 3).

Because of sagging hinges and a general lack in energy efficiency, windows that are old, especially those in older homes, can be difficult to open or close. In many instances, a few easy repairs can transform these windows into smooth operators and save homeowners cash on energy costs.

It is crucial to have the tools needed before you begin. Mark the hinge channel location on the frame (Photo 1) using a pencil. This will allow you to get the channel back on the correct position after you've finished. Remove the sash and then remove all hardware including the parting beads, cords, and chains that keep the sash in place. The nozzle shield of the heat gun and a medium setting can soften any hardened putty. Remove the old sash and place it in a bag that is labeled.

Sash Weights

Whether your window sash repairs are to replace a damaged cord or simply to keep the windows functional, replacing worn out weights for sash will improve its operation and reduce the energy cost. Sash weights are heavy lead or iron cylinders that are enclosed in a hidden cavity and attached to the movable the sash with a rope. They provide counterbalance which allows the window repair near to be opened and closed without the need for mechanical or electrical devices. If they fail, sashweights tend to be left unnoticed or disabled by homeowners.

It's not easy to retrieve the sash-weight that fell from the cavity, so you'll need to find one that is suitable for the. You will also require a fresh piece of string, a length sashcord and a few sashpulleys for tying the new weights to the cord.

Older wood windows are joined by mortise and tenon joints. Hammers and pins can be used to remove the wood pegs holding the parts together. The majority of these pegs are large on one side, but smaller on the other. It is crucial to first remove the smaller diameter sides. Sashes made later in the century made use of glue instead of pegs and can be separated by cutting through the glue line with an instrument, and then tapping the mortised part loose with mallets.

After the sash has been removed, you can remove the sash stop and access the weight pocket. Usually this is accomplished by drilling an opening at the bottom of each jamb. This hole is covered by an access panel made of wood which can be removed to let you view the inside of the frame.

After the sash has been stopped and the access panel removed, you'll be able to remove the weight from the sash and replace it with new. Make sure you weigh the sash prior to you do this, since the old weights could be different in size from the one you need. After the new weight is installed you can tie a string around it and then thread it through the pulley of the sash. Then attach the string to the frame, leaving a few inches of string sticking out from the head for future adjustment.

Sash Cords

In most old double-hung window, a chain or cord is attached to the weights. This supports and keeps the sashes in the jamb in a balanced manner. Over time, these cords can get damaged and make it difficult to raise the windows. A new sash cord will give you the ability to move the sash up and down and hold it in position when it is opened.

To replace sash cords the first step is to remove the access panels from the jambs. These are usually fixed or screwed in and will need to be removed or moved. You might be able to use a hammer and chisel to prise them off however, it is always best to lay down dust sheets prior to commencing any work.

After you have removed the access panel, you are able to begin working on the sash. Utilize a flat bar, or chisel to pry the tiny parting beads from their grooves. It is essential to be patient as they're often placed in a wedge or nail. If the sash remains in place, pull the mortise and tenon joints free with a hammer or screwdriver and then take out each wood peg. You should be able to move the sash back and forth without difficulty, though it will probably need some lubrication if it feels stiff.

With the sash in an open position, measure enough sash cord/chain to reach from the pulley on the top of the jamb to the sash slot in the bottom. Cut the chain or cord and then secure it in the step 6 above. You can employ a hammer and screws or nails, however nails are less likely to cause damage.

It is best to keep the original weights in place unless you have purchased a kit to replace the counterbalance. They are not expensive and are easy to install if purchased them from salvage shops for architectural use. Based on the size of your window, one or two sash weights could be needed to keep the sash in an open position.