• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For uPVC window repairs single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the old frame very easily. However If windows with double panes are anchored by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall onto the fabric rather than on the floor where they can be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will keep water and drafts from entering your home until a professional is able to repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the door and the window is substantial, you may prefer a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of issues like sliding. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to get at the frame. Then, using an screwdriver, take off the hinges on the top and bottom and uPVC window repairs adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit, tighten the screws until they stay in place.

If you can't reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loosen. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it can be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and perform a test fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is important to act if you awake each day to find a smoky wall and wet floors. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem the caulking used previously may require removal before a new layer of caulk can be applied. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window doctor. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with ease it could be hinges at the fault. They can be repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is very easy to change a window hinge however it is simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The problem can be caused due to opening the window in the wrong way or by a poor installation in the factory. This issue can be fixed by sending us a photo via our website and we will be more than happy to give you advice.

It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. This must be done at a minimum once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges can also be unbalanced due to wear, which can cause an opening between the frame and sash. This can be easily fixed by giving them a good clean, but in the event that they are beyond repair it could be necessary to have them realigned or replaced. The interlock, which is located on the hinge side of the window, may also become misaligned, again it may be possible to just give them a thorough clean, however in some instances it could be necessary to have these replaced.

The second most frequent reason for draughts are the window seals. These are prone to wear or damaged over time and let air escape through the gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder, these are typically fabric tubes filled with some type of filler. They can be positioned on the top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and eventually, they will reach the point when it's more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it's best to seek professional assistance as soon as possible.