• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as aluminum or timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the old panes. In this situation you'll need to locate some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and repair the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you may want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc Window Repair windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. However, over time they can suffer from a variety of problems including sliding. A sagging uPVC windows could cause issues with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sagging.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need to open the window to get to the frame. With a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're happy with the fit, tighten the screws until they remain in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it could be caused by the handle mechanism getting worn out. Luckily, it's not difficult to repair a loose upvc window repair near me window handle yourself. First, you'll need close the window and perform an experiment to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer of caulk is applied. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

Verify that the drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you may need to think about replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass it is more likely the issue is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with a breeze, it may be hinges that are at fault. They can be repaired by any skilled DIYer and can be completed in just a few minutes.

Like all mechanical parts, hinges can be damaged over time. It's easy to change a window hinge, but it's easier if someone helps you to hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or due to inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph on our website. We will be more than happy to give you suggestions.

It is also crucial to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also become unbalanced due to wear, creating a gap between the frame and sash. If they are beyond repair, it might be necessary to get them re-aligned. The interlock, which is located on the hinge of the window, may be misaligned. Again, it may be possible to just give them a good clean, but in some instances it could be necessary to get them replaced.

The next most common reason for draughts are the window seals. These can become worn down or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the risk of draughts.

One of the most effective ways to reduce draughts is by using a draught excluder, these are typically made of fabric that are filled with some type of filler. They can be placed on top of your windowsill. These will help to block out cold air and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and there may come the point when it's more efficient to replace them than fix them. If you encounter any issues with your window made of upvc you should consult an expert immediately.