• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When It's Time to Repair Windows

If your windows require repair, you must be careful when working. First, you should put on a pair of safety gloves and cut-resistant gloves to stop glass shards from slicing you while you work.

A quick fix for a broken window is to place a plastic cover over the crack. This will stop rain, snow and insects from getting into the home.

Glass that has cracked

Glass that is cracked not only make your home look less appealing but also allow drafts and other elements to enter the house. It doesn't matter if the cracks result from an impact, such as soccer or baseball or stress, such as the sudden temperature change, but it is essential to have them fixed as quickly as you can to prevent further damage and keep your windows functioning effectively.

If your window is cracked, but not broken, a quick solution is to use clear tape to cover it. This is a simple, inexpensive solution to shield your window from dust, water, bugs, and Window doctor other debris. It also shields your windows from the weather.

If the crack is extensive or appears to be getting worse, it's recommended to consult an expert. A professional glazier can identify the root of the crack and recommend the most effective repair method.

Impact cracks are the most frequent window cracks. They usually occur when a hard object hits your window with enough force that it breaks. The cracks are usually with a starburst-like pattern of lines and broken pieces that can be quite dangerous if they fall loose. The crack could compromise the gas that is between the panes of your double-pane windows and decrease its energy efficiency.

Stress cracks are another kind of crack that develops over time due to extreme temperature fluctuations and other environmental factors. These cracks usually begin near the edges of your Window Doctor and can eventually expand into full-blown break.

A pressure crack is a more severe crack but it is still able to be fixed. This is most often an arc of curvy lines that extends across one or more sides of the window. It can be the result of high or low air pressure, which can lead to expansion or contraction of the glass.

There are other products that can be used to repair cracks in window glass If you're willing to go further than nail varnish and tape. A product such as Glass Repair Film is a bit more costly, but it will provide more protection and longevity for your windows. If you'd rather DIY, epoxy is an adhesive that can be used to repair cracks and prevent further damage. It can make your window appear as if it never had any cracks at all.

Leaking Windows

If you notice an area of dampness under your window, or notice that the wood around it is brittle or rotting, it may be time to start a windows repair project. Mold and mildew thrive in excess moisture which can cause numerous issues in your home. They can affect the quality of indoor air, lead to sagging of drywall and increase the severity of allergy symptoms. If left unchecked, they can also cause structural damage to the structure of the house.

If the water is coming in from the outside or is visible through the frame it's best to get an expert to assist you to fix the problem right away. Leaking windows are among the leading causes of structural and mold damage and should not be left untreated.

In many instances, a single layer of caulking is enough to stop leaks. Before applying the caulking, you'll need clean the area and get rid of any caulking that is in place.

You'll also have to inspect the weep holes in the frame to ensure they're not blocked with debris. These holes are designed to drain rainwater but can become clogged over time with insect corpses or other debris.

If windows have double panes it is also necessary to inspect the seal between the glass and the frame. This helps to keep the gas from escaping between the panes, making the windows more energy efficient. As time passes the seal will get worn out and let water into your home.

The water stains on the walls and ceiling are another indicator of a leak. These occur when wall is soaked with moisture, which weakens its fibers and causes discoloration. You might also find peeling paint caused by the effects of the water weakening its adhesive properties and tearing away from the wall.

Faux Muntins & Mullions

In the past, muntins and mullions (or glazing bars in the UK) separated and held panes of glass in the classic multi-pane windows. Since bigger expanses of glass with tempered coatings became available following WWII they went out of fashion. Today, they're only used as a decorative feature in some older homes.

The effects of rain or wind can harm one support or a small portion of them, resulting in a crack in the window. Repairs can be made to the majority of these brittle and decaying parts.

First, clean the affected areas with a sponge and an ammonia-based cleaning agent that doesn't leave a traces. Take off any rotting or loose pieces and trim the intersections of the horizontal and vertical window muntins using an exact knife. Once you've trimmed the intersections, seal the lower portion of the window frame using painter's tape. Now, you can apply a heavy coat of white paint, paying particular focus on the areas that were lightly coated on the first coat. Allow the paint to dry completely before taking off the tape and applying a new coat.

If you have a more severe problem like cracks that form an hourglass shape in the middle of the window it's likely to be better to replace the sash. In these instances it is essential to locate an alternative window doctor that is in line with both the style and size of the existing one.

Installing a grid window is a more affordable option. These windows consist of a glass pane that has a series of muntins that are glued on the surface. This gives them a divided appearance. They're not as energy efficient as traditional windows, but they are.

Installing a drip cap will prevent water from leaking into the window frame. Most home centers sell these drip caps made of aluminum for about $20. They're a lot easier to install than a replacement window sash and will provide you with the same function as a genuine mullion or muntin.

Broken Sashes & Frames

A damaged window sash should be a signal that you should seek help. A broken sash, if left unchecked can cause water leaks, wood rot and other serious problems to the frame and sill. If you've damaged your sash, replace it as soon as possible to ensure that the window is sealed.

The problem is often caused by worn-out or improperly installed cords. It is easy to replace these cords on the majority of double-hung window models. To begin, you'll need to remove the tabs made of metal that hold the sash in place. To do this push up on one side (it does not matter which side) of the sash and then pull it towards the opposite side to take it from the window frame. To get access to the sash cords, you'll need to remove the strip of separation that separates the sash.

Once you've removed the sash, be sure to look at its metal tabs and compare them to the tabs on the new sash. If they are different it may be difficult to insert the new sash into its correct slot and could impact how the sash performs. This can be easily fixed by placing the tabs at the correct locations on your new window.

In addition to the sashes, you'll have to examine your window frame for any problems or rot. It's a good idea to do regularly, as wood will shrink and wear down as time passes. You should fix any visible damage as fast as you can, to avoid a more serious issue.

If your window frames have deteriorated and are in need of repair, you can treat them with a homemade preserver created from half mineral spirits and boiled in linseed. After the treatment has dried for two days, you can re-finish your frames using a high quality latex paint. A new coat of paint will help to protect your window from the elements too.