• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Regularly inspect the window sashes for signs of damage, mildew and mold. If you catch these issues early you can save money on repairs in the future.

The sash is an interior frame that can move upwards and downwards in windows that open. This article will show you how to perform several simple sash repair.

Weather Stripping

Wooden window sashes can give a classic look to your home. They are also durable and last for a long time if they are properly maintained. However, they can be damaged or deteriorate over time because of exposure to the elements and wear and wear and tear. Thankfully, sash repair experts can restore your windows to their original condition and keep them looking great for a longer period of time than replacement windows.

The first step in sash window repairs is addressing weather stripping. It's found on both the sash and frame. It could cause drafts if damaged or is loose. To fix it, begin by determining the brand of your window and glass manufacturer date (etched in the corner of the glass or on the aluminum spacer between panes). Remove the sash and mark its width and height so that you can get replacement weather stripping that matches.

Then, take it off and set it on a work surface so that you can reach all four sides. If the sash is double-hung, you must remove the weights with their ropes that should have fallen into the pocket within the jamb lining. After removing the sash with the utility knife, remove the old weather stripping by hand or using a putty knife.

After the sash is cleared, you can replace parting stops. These are long pieces that divide the sashes. Pam prefers to use standard 1/2-inch by 3/4-inch window repair trim from the lumberyard. However, you could substitute a scrap piece of wood.

After removing the stopper for the parting and trimming it to length, apply a thin coat of glazing compound to the bottom of the sash. Smooth the compound with your putty tool and allow it to dry for at least a day. Once the putty has fully cure it is possible to apply a topcoat of acrylic latex. This will protect the putty and give your sash a fresh appearance.

Sash Hardware

The hardware that supports window sashes prone to wearing out from age and use and the result could be a door or window that can't be opened or closed easily. It's important to know that replacing or fixing this hardware is usually easy and affordable. If you're having difficulty opening the sash, spray some oil into the jamb channel. Then, you can slide the sash open to see if it resolves the issue. If the issue persists it's most likely to be due to the sash's balance. You'll need to take off the window sash to get access to this part of the hardware.

Sashes for windows should be able to open and close without much effort. However, this can be a challenge if the weights have been worn out or the sash-to rail meeting rail is not properly coated. This problem could be caused by many factors such as the lack of maintenance or a mismatched weight rating.

If the hinge arms on the window begin to move, this can cause the sash drag, and then eventually to hit the frame in the opposite corner (Photo 1). To correct the issue ensure that the sash is aligned in the frame opening and then remove it. If the sash has been attached to the hinge arm, take it off the hinge and replace it. (Photo 2). Install the new sash (Photo 3).

Due to hinges that are sagging, and a general deficiency in energy efficiency, old windows especially in older houses, could be difficult to open or close. In many instances, a few easy repairs can turn these windows into smooth operation for the first time and save the homeowner money on energy costs.

It is crucial to have the tools you require before you start. Start by marking the location of the hinge channel on the frame with pencil (Photo 1). This will allow you to get the channel back on place correctly when you're finished. Then, remove the sash and remove the hardware including the beads that separate (Photo 2) and the cords or chains that hold it in place. Soften any hardened putty with an electric heat gun set to medium and equipped with an shield to block the nozzle. Remove the old sash and put it in a bag labeled.

Sash Weights

Sash weights can be replaced to improve the operation of your window sash and reduce the cost of energy. Sash weights are heavy, lead or iron cylinders enclosed in a concealed cavity and linked to the moveable the sash with rope. They are counterbalancers which allows the window to be closed and opened without using mechanical or electrical devices. The sash-weights are typically neglected or ignored by homeowners and turned into scrap when they fail; therefore, you may need to find replacements.

It's not easy to retrieve the sash-weight that fell from the cavity, so you'll need to find one that fits correctly. You will also need a new piece of string, a length of sash cord and some sash pulleys that will tie the new sash weights onto the sash cord.

Older windows made of wood are joined by mortise and tenon joints. The wood pegs holding the parts together can be removed by pin punches and hammers. The majority of them have large diameters on one side and a smaller size on the other, which is why it is important to remove the small-diameter sides first. Sashes that were made later in the century utilized glue instead of pegs. They can be separated by cutting the glue line with a knife, then tapping the mortised section loose with mallets.

After the sash is removed, you can remove the sash stop and gain access to the weight pocket. This is usually done through tiny holes at the bottom of every jamb. This hole is then covered by a wooden access panel that can be cut off to allow you to view the inside of the frame.

After the sash has been stopped and the access panel has been removed, you can take off the weight you used and replace it. Make sure you weigh the sash before you do this, as the old weights could be a different size than what is needed. After the new weight is installed then tie a string to it and then thread it through the pulley for the sash. Then attach the string to the boxed frame, but only leave a few inches of string protruding from the head to allow for future adjustments.

Sash Cords

In the majority of old double-hung windows, a chain or cord is attached to the weights. This helps keep the sashes in the jamb level. Over time these cords can break, making it difficult to raise the window. A new sash cable will give you the ability to move and lower the sash and keep it in place when it is opened.

The first step to replace cords for sash is to locate and take out the access panels located in the jambs. They are usually screwed or nailed in and need to be removed. It is possible to remove them with the hammer or chisel but it is always better to lay out dust sheets prior to starting any work.

After you have removed the access panel, you can begin to work on the sash. Utilize a flat bar or chisel to pry the narrow parting beads from their grooves. It is important to take your time as they're often placed in a wedge or nail. If the sash is still in place, remove the mortise and tenon joints with a hammer and pin punch or screwdriver, and then take out the wood pegs on each component. You should now be able to move the sash around freely, although it might require lubrication if it feels stiff.

Determine the length of sash chain/sash cord needed to reach the sash slot at the bottom from the pulley located at the top of the jamb. Cut the cord or chain, and then fix it using the previous step. You can either employ a hammer and nail or screws, but nails are less likely to cause damage.

If you haven't purchased a kit that replaces the old counterbalance system it is recommended to keep the original weights for balancing in place. It's not expensive to buy them from architectural salvage stores and they'll be easy to install once you have the sash unlocked. Based on the size and shape of your window repair near me you may require one or two sashweights in order to keep it open.