• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. However If you have double pane windows that are held in place by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this instance you'll need locate some plastic spacers that aid the new pane in being able to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a good idea to seal the gap after the glass has been removed. This will prevent drafts and water from entering your property until a professional arrives to repair the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap between the door and the window is large, you might want to use security screens that includes a window. This will provide the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. As time passes, they may be affected by a variety of issues such as sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll need open the window so that you can get to the frame. Then, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have relocated your hinges. If you're happy with the fit, you can tighten the screws until they stay in position.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it could also be due to the handle mechanism getting worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform a test fitting. The corners of the sash need to be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it is important that you take action. Windows that leak water do not only lead to the degrading of the structure of your home but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to replace the window repairs.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leak originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. It is also possible to be fixed by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease, it may be hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to change a window hinge however it is easier if someone helps hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. This can be done by checking for the arrows on each hinge. This shows which way the window should open.

The issue could be caused by opening the window improperly or by a poor installation at the factory. Sending us photos through our website can often solve the issue. We are more than happy to provide suggestions.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. First, the hinges due to wear and tear may become displaced, which causes gaps to develop between the sash and the frame. If they're beyond repair, it might be necessary to have them realigned. Second, the interlock can be unbalanced. This happens on the hinge side and could require to be cleaned. In some instances it might be necessary to replace them.

These seals can wear down or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it could be cheaper to replace them instead of fixing them. If you are experiencing issues with your upvc window you should consult an expert as soon as you can.