• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Planar Magnetic Technology for Headphones

A handful of HiFi audio companies are trying to revive the planar magnetic technology. These companies produce headphones with planar drivers that are based on the old school that deliver the most powerful, full-bodied sound signature.

This paper examines the intrinsic characteristics of a planar magnet device by examining the inductance of the winding, leakage capacitance and winding conduction losses. In addition, a strategy for reducing these parasitic elements is proposed.

Low profile or low vertical height

Compared to traditional wire-wound magnetics Planar magnetic technology has lower profile and greater efficiency. It also minimizes leakage capacitance and parasitic capacitance. This allows for a smaller size core to be used, which lowers the cost of the device. It also does not require the magnets to be clamped. This makes it perfect for use in power electronics devices.

Another benefit of planar driver (Recommended Web site) magnetic technology is that it is smaller and lighter than traditional headphones. It also can handle higher frequencies with no distortion. This is because the diaphragm that is flat in these devices is usually composed of a thin film with a conductor trace. The film can react quickly to audio signals and produce high levels of sound pressure with ease.

This means that the audio that these devices produce is more rich and detailed. This is why they are popular with audiophiles, especially those who prefer listening to music at office or at home. It is crucial to remember that a planar magnetic driver requires a powered amplifier and digital audio converter to work properly.

The sound produced is more natural and precise in comparison to dynamic drivers. Planar magnetic drivers are also able to respond much more quickly to changes in the audio signal, which means that they are the perfect choice for listening to fast music.

Despite their benefits, planar magnet drivers have some drawbacks. One of these is their cost, Planar Driver which can be attributed to the massive amount of magnetic material needed to run. Their weight and size can be a challenge particularly when they are being used as portable devices.

Wide band gap (WBG) devices

Wide band gap (WBG) semiconductors are materials that have better electrical properties than traditional silicon-based devices. They can withstand larger current densities and higher voltages, as well as lower switching losses. They are therefore ideal for optoelectronics as well as power electronics applications. Wide band gap semiconductors such as gallium nitride and silicon carbide can bring significant improvements in performance, size, and cost. They are also more eco sustainable than conventional silicon-based products. These attributes make them attractive to satellite and aerospace manufacturers.

Planar magnetic drivers work on the same principles as dynamic drivers. A conductor in an electrical circuit moves between two magnets that are fixed when audio signals pass through them. Instead of a coil bonded to a conical diaphragm planar magnetic drivers utilize conductors in a flat array attached to, or embedded in a diaphragm-like film that is able to be made thin. The conductors comprise made up of coils that sit on the diaphragm and sit directly between two magnets. This creates the push/pull phenomenon that creates the diaphragm's movement.

This technology produces music without distortion and provides a unique and pleasing sound. The even distribution of the magnetic force over the entire surface of the driver and the absence of a coil sitting behind the diaphragm causes it to move uniformly and quickly, resulting in high-quality, precise sound. The resulting sound is known as isodynamic, orthodynamic, or magnetically-incident.

However, due to their intricate design and higher price point headphones that use planar magnetic drivers are typically more expensive than those using other driver technologies. However there are plenty of affordable, high-quality alternatives such as the Rinko by Seeaudio and S12 Z12 by LETSHUOER that were recently released.

Power electronics

Contrary to conventional wire wound magnetic components planar magnetics are more effective at dissipating heat. This allows them to handle greater power without undue stress or audible strain. This makes them ideal for use in headphones. In addition to their higher efficiency, planar magnetics provide higher power density. The technology is particularly suited for applications like fast charging of electric vehicles batteries, battery management, and military systems.

In contrast to dynamic driver headphones which utilize a diaphragm suspended by a voice coil planar magnetic drivers operate on a much different principle. When an electromagnetic signal is transmitted through the array and the magnets on the opposite side of the diaphragm get pushed together and a push-pull effect is produced. This creates soundwaves that move the diaphragm and generate audio.

Planar magnetic devices are more efficient than conventional magnetics because they have a greater surface-to-volume ratio. They are able to disperse heat more efficiently, allowing for higher switching frequencies while maintaining their maximum temperature rating. They have lower thermal sensitivities compared to wire-wound devices. This allows them to be utilized in smaller power electronic circuits.

Designers must consider several factors to optimize a planar booster inductor. These include the core design winding configurations, winding configurations, loss estimation and thermal modeling. The ideal inductor features include low winding capacitances, low leakage inductance, and easy integration into the PCB. It should also be able to handle high currents and be of a compact size.

In addition, the inductor must be compatible with a multilayer PCB that has SMD or through-hole package. The copper thickness must also be sufficient to prevent thermal coupling and reduce the eddy-currents between conductors.

Flexible circuit-based planar winding

In planar magnetics, flex circuit-based windings can be used to create a high-efficiency resonator. They utilize one-patterned conductor layers on a flexible dielectric film. They can be fabricated using a variety of metal foils. Copper foil is a popular choice because it has excellent electrical properties. It is also processed to allow termination features to be used on both the front and back. The conductors of a flex circuit are joined with thin lines that extend beyond the edges on the substrate. This allows for the flexibility needed for automated bonding using tape. Single-sided flex circuits are available in a wide range of thicknesses as well as conductive coatings.

In a typical pair of planar magnetic earbuds headphones, the diaphragm will be set between two permanent magnets that vibrate in response to the electrical signals that are sent by your audio device. These magnetic fields produce an audio wave that travels across the entire diaphragm's surface, creating a piston-like motion which prevents distortion and breakups.

Planar magnetic headphones are able to reproduce a variety of frequencies, particularly at lower frequencies. This is due to the fact that they can create a greater surface area than traditional cone-type drivers, which allows them to move more air. Additionally, they can reproduce bass sounds with a much higher clarity and detail.

However, planar magnetic headphones are expensive to produce and require a powered amplifier as well as a DAC to function correctly. They are also larger and heavier than standard drivers, making them difficult to transport. Their low impedance also requires a lot more power to drive, which could quickly add up when you listen to music at a high volume.

Stamped copper winding

Stamped copper windings are used in planar magnetic headphone magnetic technology to increase the window utilization and reduce manufacturing costs. The technique involves placing grooves in the coil body to hold the windings in an accurate layer. This technique helps to prevent coil deformations and improves tolerances. This reduces scrap and improves quality control. This type of planar coil is typically employed in contactor coils as well as relay coils. It can also be found in ignition coils and small transformers. It is also utilized in devices that have wire thicknesses as high as 0.05mm. The stamping process produces an uniform coil with a high current density. It also ensures that the windings are perfectly positioned on the coil body.

Unlike traditional dynamic drivers, that use a conductor voicecoil behind the diaphragm in order to create sound waves, planar magnetic headphones have a range of flat conductors applied directly on the thin diaphragm. The conductors vibrate when electronic signals are applied. This causes the motion of pistons that produce sound. Planar magnetic headphones produce a higher-quality sound compared to other types of audio drivers.

This technology can increase the bandwidth of transducers. This is important, as it allows them to operate across a larger frequency range. It also reduces the power requirements of the driver.

However, there are disadvantages to this new technology. It isn't easy to develop a diaphragm made of thin film that can withstand the high temperatures needed for this technology. However, companies such as Wisdom Audio have overcome this issue by introducing an adhesive-free product that can withstand temperatures up to 725degF (385degC). This allows them to produce audio with the highest quality without compromising durability or longevity.