• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers that will help the new pane to fit perfectly into the window repairs near me frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the fabric instead of onto the floor where they could be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will keep water and drafts from entering your home until a professional arrives to repair the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is large, you might be interested in the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, over time, they can suffer from a variety of issues like sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll have to open the window to access the frame. With the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, tighten the screws until they stay in place.

If you aren't able to move the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles may also become loose. Often this is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need close your window and do an initial test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is essential to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks from windows are not just a cause for degradation of your home's structure but also undermine your efforts to control the temperature within your home. Most often, uPVC window repair leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

Check that any drainage holes have no debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze It could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a very simple process but it can be easier to do if you have someone to help hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular way or by improper installation in the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be more than happy to give you suggestions.

Regularly lubricating the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also reduce the risk of a window getting stuck and stop corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause a gap to form where the sash joins the frame. They can be repaired by giving them a good clean, but if they are beyond repair it could be necessary to have them re-aligned or replaced. The interlock may be disaligned. This happens on the hinge's side, and could require to be cleaned. In some instances, it may be necessary to replace these.

The next most common reason for draughts is window seals, these can become worn down or damaged over time, and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it is more cost-effective to replace them instead of fixing them. If you are experiencing issues with your Upvc window you should consult an expert immediately.