• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing upvc replacement window handles (right here on Rptu)

Almost all customers agree that the upvc replacement window handles are simple to install and feel like good quality. However, it's important to know that the type of handle you choose must be right for your window.

The step height is the most crucial factor. This is the distance between the handle and the frame, or base. Other considerations include locking mechanisms and designs.

Replacement parts

You can purchase a range of replacement upvc handles. There are many styles and colors to choose from, and you're certain to find something that is compatible with your existing windows. It's easy to impulse buy especially if the handle fails, so it's best to be patient and examine the details prior to committing to buying a replacement. First, you need to be aware of the type of upvc handles you have and what the differences between them. The table below shows the most common handles to help you find the one that will fit your upvc windows.

The majority of double-glazed windows have epag handles. They are typically attached to the frame by two screws that are screwed into the frame from both sides, above and below.

The spindle bar in the back can be different sizes, and can determine whether they are left-handed or right-handed. It is important to determine the measurements of the handle you need to ensure you get the correct replacement.

The arm is fixed to the frame with two bolts, much like the Espag handle. The arm is curved at a low angle to ensure that it doesn't scratch your blinds. This is a good option for blinds on your upvc windows and want to ensure that the handle blends with the blinds.

Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge that rests on the frame of the window. This type of handle is typically found on older upvc windows and also on some wooden windows.

On casement windows the tilt and turn handles can be operated by either turning the handle or pressing the top of window. The window is opened from the inside and allows you to clean outside without needing to step out on a ladder or step over the fence. They are also an excellent option for those with limited mobility and increase security and accessibility in the home.

Tips and tricks

Many people will need to replace their uPVC window handles at some time. When this happens it's best to know a few hints and tricks that will assist in making the task go as smoothly as it can.

The first thing to do is to determine what kind of handle you have at home. Depending on the kind of handle and the locking mechanism, it may be necessary to replace the lock and handle. If the roller cams and shoot bolts (espags) are stuck or are seizing up, you'll have to replace them along with the handle.

Fortunately, the majority of uPVC handles conform to industry standards and are very alike. This makes replacing them an easy process. First, remove the screws that cover the handles. They are typically pozidrive screws. Once these are removed, you can then remove the handle.

It's a good idea to take note of how far the spindle protrudes from the base of the handle after you take it off it. This will enable you to measure the spindle length for a replacement handle. To do this, simply take a measurement of the square peg that sticks out from the base of the handle and use that as a reference.

This is particularly important for inline uPVC window handles since they'll always be straight and will only open either left or right, and they won't operate in the middle. It's a good idea if you are not sure what kind of handle you have at your home, to borrow a handle and check out how it works.

Another excellent method to figure out what handed the uPVC window handle is is to simply look at how the handle rotates when operating. Handles that are hand-operated will turn clockwise or anti-clockwise. If you aren't sure then ask someone to open the window using the handle to see what happens.

Take a measurement of the spindle

The selection of the right replacement handle for your windows could be difficult as different handles are not identical in size. The spindle is what is the mechanism that locks the window. It is crucial that when you fit the new handle, you measure the length of the spindle precisely to ensure it fits. There are many different kinds of uPVC window handles that operate in different ways, therefore it is crucial to know the type of handle you have as well as the type of locking system that you are using.

The spindle of the handle extends from the handle's rear, and is connected to the lock gearbox in the window frame. When you turn the handle, this turns the lock within the gearbox, and opens the window. They are typically used on uPVC windows with casement. They can be locked using keys to increase security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They have an "nose" that is secured by a wedge-shaped striker block. They are also easy to use and can be locked with keys. It is more difficult to replace these handles since they aren't as common as the espagnolette handles.

If you have a tilt and turn uPVC, you will require a new handle that has an alternative locking system. It will be able to tilt the window open but also turn it back and forth to fully open it. It is essential to ensure that the handle you choose has a spindle size at least 55mm, or it will not be able to penetrate the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you'll need to take care when unscrewing it. You may need to open the window a bit larger than normal to ensure you reach both screws that are fixing it to the frame. After you have installed your new uPVC handle and checked that it is in the proper position, you are able to tighten the screws, and test the lock to confirm that it works properly.

Fit the new handle

If you have the proper replacement handle, it should simply be screwed into the appropriate position. This will require a screwdriver and could be simpler with an electric one. It is essential not to overtighten the screws when screwing them in. This can cause the handle or knob to warp.

The second step in installing the handle is to put in the spindle. The spindle is the part that is inserted into the handle and operates the locking mechanism in the window. It is crucial that it is fitted correctly, as this will ensure the window is able to be closed and opened with confidence.

There are a variety of types of uPVC handles. There are several types of uPVC window handles.

Espagnolette Handles - these are handles that are inline and can be used on windows that tilt and turn to open the window.

Cranked Espagnolette Handles: These are similar to inline handles but have a curved design which is ideal for hard-to reach windows.

Tilt and Turn Handles They are used on tilt and turn windows to control the opening and closing mechanisms.

These are the most common and the majority of uPVC windows have these in their place. They are commonly called 'Bay Windows' in the UK.

If your uPVC window handle is damaged, it can be extremely frustrating. However, there is no need to replace the entire uPVC window because of a broken handle. There are a few simple steps you can take to repair or replace a damaged upvc window handle replacement handle.

By identifying the kind of window you have, measuring the length of the spindle and buying the replacement handle, you can fix the broken window handle. It is important to be patient and prioritize safety when working with windows and tools however, this is a easy task. It could make the difference between a secure and secure home or an insecure open window! If you have any questions or want to talk to a specialist about replacing your window handle, contact Bridgewater Glass. We have a team that is experienced and knowledgeable to assist you with any problem.