• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However If you have double glazed window repairs-pane windows that are secured by internal beading, it will be more difficult to take out the old panes and put in new ones. In this situation, you will need to source some plastic spacers that assist the new pane to fit properly into the frame of the window.

If you plan to try to remove the glass panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also a good idea to lay down a dropcloth before you begin working on the glass to ensure that any shards fall on the fabric rather than on the floor where they could be trampled on and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from getting into your property until a professional is able to fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the distance between the window and the door is large, you might need to consider security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. As time passes, they may develop a number of problems, including sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from getting worse.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for fit. If you are happy with the fit of the window repair, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Often this is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need close your window and do a test to ensure that it fits. The corners of the sash need to align with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and wet floors. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking used previously may require removal before a new layer is applied. It is crucial to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze, it may be hinges that are at fault. These are easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. Changing a window hinge is essentially a very simple process, but it's simpler with someone else to help hold the frame in place.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to offer advice.

It is also important to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges can also become misaligned due to wear, causing gaps where the sash and frame meet. This can be easily repaired by giving them good clean, but if they are beyond repair it could be necessary to get them re-aligned or replaced. In addition, the interlock could be misaligned. It is located on the hinge's side, and may need to be cleaned. In some cases it might be necessary to replace them.

The next common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will lessen draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically fabric tubes that are filled with some sort of filler and can be put on top of your windowsill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs windows made of upvc will provide excellent insulation and security for your home. However, it is important to realize that windows last for a certain period of time and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as you can.