• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can help homeowners save money and keep their homes comfortable. Window replacements may be required in the event of serious damage like broken glass or a broken window frame.

But there are many other issues that can be addressed to extend the lifespan of your windows. Some common issues include:

Cracked or broken Panes

Cracked windows can be caused by a lawnmower that throws rocks at the wrong time or a tree branch being blown by strong winds. This is not only visually bad, but it can also lead to higher energy bills as the broken pieces allow cold air in to your home. Luckily, it's usually relatively easy to fix windows with cracked panes.

Begin by carefully removing glass with gloves and safety sunglasses. You may have to make use of a utility knife in order to loosen any remaining putty or glazing compound around the edges of the frame. Next, wipe down the glass's surface and the wood of the frame with a soft cloth or paper towel.

After cleaning the area, apply a silicone caulking that is water-proof around the frame's perimeter. This will stop water from entering through the crack, which could cause further damage to both the frame and the glass.

A serious crack in double-paned glass could cause gas to leak between the panes, rendering your windows less efficient in insulating. If the crack is so extensive that it is threatening the structural integrity of the window or the inner pane is missing you might need to consult an expert.

Cracks caused by thermal stress can occur when there is an extreme temperature difference inside and outside your home. The glass is then able to expand and contract. If this happens to two parts of a window it's best to replace the glass instead of trying to repair it.

For cracked windows that aren't quite ready to be replaced Clear tape can do a decent job of preventing the crack from spreading and keeping out bugs and cold air. You can also cut the length of a nylon stocking to completely cover the crack and then glue it to the surface with duct tape. It's not a solution that will last forever however it can be useful in a pinch and keeps cold air and insects away from your home. If you notice cracks appearing on your windows that are older, you should check with your local business to determine if replacing the whole window is the best option.

Rotten Wood

Wood rot is a common issue with windows. It can damage a home's appearance and pose a safety danger. However, it is possible to fix rotted wood. It is first necessary to determine the root of the wood rot. This can be accomplished by looking for roof leaks or gutters that are not functioning or cracked caulking, as well as other areas that allow water to get into the wood.

The next step is to take out any rotten parts of the window frame. This can be done with the use of a chisel, rasp or claw hammer. Once the rotten areas have been removed then you must replace them with fresh wood. Pre-treated wood is suggested for this task, since it is resistant to decay. If you are unable replace the rotted wood, you can try using wood hardener or filler to strengthen the damaged area. The majority of hardware stores carry this type of product. Follow the directions on the label of the product to achieve the most effective results.

After you have replaced the decayed areas of the windowsill, it is essential to protect the newly-repaired area. This can be done by applying a water-resistant wood sealant. Sikkens for instance is a great one to use.

Use a two-part epoxy to safeguard the wood from further damage. It is simple to apply and provides an excellent finish. It is essential to follow the instructions on the label. After the epoxy filler has dried, you are able to sand the wood's surface. It is best to begin with a rough grade of sandpaper before moving to a smoother grade.

You don't want to expose your damaged part to further moisture. It is recommended, so, to cover the repaired surface with an oil-based primer which will shield it from water. Then, you can reapply the wood sealant that is waterproof.

The website won't work

There are many reasons windows don't open. The house might have shifted, or the wood frames could have warped during wet weather. There is also the possibility that someone put them in place to protect themselves. But with some patience and the right tools, all windows that are locked can be opened.

Gunk or debris that has accumulated can be a major reason of the window not opening. Acme Glass notes that dirt and grime accumulates over time on sliding tracks, hinges, and locks. Metal hardware can also rust when it comes into contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease will help prevent oxidation and keep your window operating correctly.

Stuck windows could be the result of an unintentional break or loosening of the pulleys used to lift and lower the window. These components may lose tension and get blocked, especially when the window is situated two or more stories higher than the ground.

If you have trouble opening a door, try using a pry-bar to gently push the window open. Place a block of wood on the frame to give your pry bar more leverage and be careful not to scratch the window repair or wood. Alternatively, try running a hair dryer across the edges of the frame for a few minutes to warm the wood and allow it move more easily.

A faulty spring can also be the cause of windows that aren't able to raise or lower. You'll need to refer to the owner's manual for additional details depending on the person who made your windows.

If you have tried cleaning the moving parts of your windows and then lubricating them but they still won't open it could be the right time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows slip from functional to unusable because windows that aren't properly shut could leave your home vulnerable to burglary and water damage. Contact us today to learn more about our replacement windows and our services!