• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When It's Time to Repair Windows

If your windows require repair, it's essential to work with care. First, wear a pair of cut-resistant gloves and safety goggles to prevent glass shards from cutting you as you work.

Placing a plastic cover over the crack is an easy fix for a damaged window repairs. This will prevent snow, rain and insects from getting into your home.

Glass that has cracked

Glass that is cracked not only make your home appear less appealing, but it can also let drafts and other elements into the house. Whether the cracks were caused by an collision (like a baseball or soccer ball) or are a result of stress, like an abrupt change in temperature, it's important to get them repaired as soon as possible to prevent further damage and ensure that your windows are functioning effectively.

If your window is cracked but not broken, a quick solution is to apply clear tape to cover it. It's a simple and inexpensive solution that will provide some protection from water, dust bugs, and other squatters and also keep out the weather.

If the crack is becoming larger or is getting more large, it is recommended to seek advice from a professional. A glazier who is experienced can determine the root cause of the crack and recommend an appropriate repair procedure.

Impact cracks are the most frequent type of window break typically resulting from a hard object hitting your window with enough force to fracture it. The cracks are usually accompanied by a starburst pattern of lines and broken pieces that could be dangerous if they come loose. The crack could affect the gas between the panes of your double-pane window and lower its energy efficiency.

Another type of crack is a stress crack, which can develop gradually over time due to extreme temperature changes or other environmental elements. These cracks start around the edges of your window, and eventually expand into full-blown break.

A pressure crack is a more severe crack but it is still able to be repaired. This is a curvy, curved line that can extend across the window on one or more sides. It can be caused by low or high pressure, which can cause the glass to expand or contract.

If you're ready to take further than nail polish and tape, there are several other products that can be used to repair cracks in your window glass. A product such as Glass Repair Film is a bit more expensive but will provide more protection and a longer lifespan for your windows. If you'd prefer to do it yourself, epoxy is an adhesive that can be used to fill in cracks and prevent further damage. It can make your window appear like it never had any cracks at all.

Leaking Windows

If you notice a damp zone under your window or that the wood around it is weak or rotting, it might be time to replace your windows. Mold and mildew thrive in excess moisture, which can lead to a number of problems within your home. They can lead to indoor air pollution, sagging drywall and even worsen allergies. If not addressed, they can also cause structural damage to the home.

It is best to call a professional if the water is visible or coming from the outside. Don't ignore leaking windows. They're a major cause of mold and structural damage.

In many instances, a single layer of caulking is all that's needed to stop leaks. Before you apply the new caulking, you'll have to clean the area and take off any existing caulking.

Check the weepholes of the frame for debris. These are designed to drain off excess rainwater, but they can be clogged by insect corpses and other debris over time.

If windows are double-paned You'll also have to check the seal between the glass and the frame. This will ensure a seal between the glass panes, and will make windows more efficient. Over time the seal may get worn out and let water to enter your home.

Water stains on ceiling and walls are another sign of leaks. The drywall becomes discolored when it is saturated by water. There may also be peeling paint as a result of the water weakening its adhesive properties and tearing away from the wall.

Faux Muntins & Mullions

In the past, mullions and muntins (or glazing bars in the UK) separated and held panes of glass in the classic multi-pane windows. After WWII, larger expanses tempered glass were available. Today, they're mainly used as a decorative element in some older homes.

Most of the time just a small or a single group of these wooden supports can get damaged by rain or wind leaving cracks in the window. You can repair the majority of these brittle and decaying elements.

First take a rag and clean the affected areas. Use a cleaner based on ammonia that doesn't leave any residue. Remove any loose or rotting pieces and trim the intersections of the horizontal and vertical window muntins using an exact knife. Once you've trimmed the intersections, seal the lower portion of the window frame with painter's tape. Then, you can apply a heavy coat of white paint, paying special attention to areas that were lightly coated on the first go. Let the paint completely dry before taking off the masking tape, and applying the second coat.

If the problem is more severe, such as an hourglass-shaped fracture in the middle of the window, it's recommended to replace the sash. In these situations, it's important to find a replacement window that matches both the style and size of the existing one.

For a less expensive alternative you can also put in an attached grid window. These windows are made of a complete glass pane with a series muntins, which are glued to the surface. This gives them a divided appearance. These windows are not as energy efficient as traditional windows.

If you're looking for a simple method to modernize your windows, you should consider installing a new drip cap to stop water from leaking around the window frame. Most home centers sell these aluminum drip cap options for around $20. They're much simpler to install than an alternative window sash, and they'll provide you with the same functionality as a real mullion or muntin.

Broken Sashes & Frames

A broken window sash can be an obvious indication that it's time for assistance. A damaged sash, not addressed, can lead to water leaks, wood rot, and other serious problems to the frame and sill. If you've damaged your sash, replace it as soon as possible to ensure that the window is properly sealed.

Most of the time, the issue is caused by worn or poorly installed the sash cords. Fortunately, replacing them is fairly easy and is possible in most double-hung windows. To start, you'll need to remove the tabs made of metal that secure the sash. Press upwards on the side of the sash (it doesn't really matter which side) and then pull it towards the opposite side in order to take it off. You'll need to remove the parting strip that separates the sash from the other to allow access to the area where the sash cords are.

After you've removed the sash, it's important to make sure you look at its metal tabs and compare them to the tabs on your new sash. If they're different, it will be hard to insert the new one into its slot and affect how the sash operates. This can be corrected by placing the tabs in their correct locations on your new window.

You'll need to check the frame of your window, too to look for any signs of damage or decay. It's a good idea to do regularly, as wood shrinks and wears down over time. You should repair any visible damage as soon as possible to avoid a more serious issue.

If your window frames are in poor condition, you'll have to treat them with a homemade preservative created by mixing half mineral spirits with half boiling Linseed oil. After the treatment has dried for two days, you can then restore your frames with high-quality latex paint. A new coat of paint can aid in protecting your window from the elements as well.