• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace and will usually fit into the frames that were previously in use very easily. However when windows with double panes are secured by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this case, you will need to find some plastic spacers that will assist the new pane to fit perfectly into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window repairs panes to ensure that any shards of glass fall onto the fabric and not onto the floor and could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and fix the window. It also acts as an obstacle to stop intruders from making their way into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. In time, they could be affected by a variety of issues such as sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need to open the window to get to the frame. Then, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having repositioned your hinges. If you're satisfied with the fit of your window, tighten the screws to keep them in place.

If you can't reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows remain watertight and secure from draughts.

UPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it could be due to the mechanism of the handle wearing out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and perform a test to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem the old caulking may need to be removed before a new layer can be put on. It is important to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more serious cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with a breeze It could be the hinges that are at the fault. These are easily replaced by any competent DIYer and can usually be completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to change a window repairs near me hinge, but it's simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrow on each hinge, this indicates which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or by poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to offer advice.

It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more easily. It can also reduce the possibility of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be disaligned as a result of wear, creating a gap where the sash meets frame. These can be easily fixed by giving them a good cleaning, but if they are beyond repair it may be necessary to get them realigned or replaced. The interlock, which is located on the hinge side of the window, may also become misaligned, again it may be possible to just give them a clean but in certain cases, it may be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is crucial to recognise that windows last for a certain period of time and there may come a point where it is more efficient to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as you can.