• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Most customers agree that the replacement handles made of upvc are easy to install and feel great. However, it's important to know that the type of handle you select must be right for your window.

The primary factor is the step height that refers to the space between the handle's nose to the base or frame. Other considerations include lockable mechanisms and styles.

Replacement parts

You can buy a variety of replacement upvc handles. They are available in a variety of styles and colors so there's bound to be something to suit your windows. It's easy to buy on impulse especially when the handle breaks so it's a good idea to take your time and check certain things prior to committing to buying a new one. The first step is to know what type of upvc handles you have and what the differences between them. The table below lists the most common handles so that you can choose the one that will match your window.

The majority of double-glazed windows have handles that are epag. They are typically attached to the frame by two screws which screw in from above and below.

They have a spindle bar on the back that can be of a variety sizes and this will determine how they work (either left or right handed). It is essential to know the measurements of the handle you currently have to ensure that you get the right replacement.

Usually fixed with two bolts, similar to the Espag handle but they are positioned low from the frame which means that the arm won't poke through your blinds. This is a great option when you have blinds on your upvc windows and you want to make sure the handle blends with the blinds.

Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge that rests on the frame of the window. This type handle is found on some older wooden and Upvc windows.

On casement windows tilt and turn handles can be operated by turning the handle or pressing the top of the window. The window is opened from the inside, allowing you to clean from outside without having to climb out onto a ladder or walk over the fence. They are also an excellent alternative for those with limited mobility. They are an excellent method to improve security and accessibility within the home.

Tips and suggestions and

There are a number of different kinds of uPVC window handles, and a lot of people will find themselves replacing them at some time. If this happens it's best to know a few tips and tips that can help the job go as smoothly as it can.

The first thing you should do is to determine what kind of handle you have at home. Depending on what the handle is attached to and which locking mechanism it uses it might be necessary to replace the entire handle and lock. If the roller cams and shoot bolts (espags) are stuck or are seizing up, you'll need to replace them as well as the handle.

Fortunately, the majority of uPVC handles follow industry standards and are alike. This makes replacing them a relatively simple process. The first step is to remove the screws from the handles, usually pozi-drive screws. Once the screws are removed then you'll be able to dismantle the handle.

When you have the handle separated from the handle, it's a good idea to make note of how much of the spindle extends from the base of the handle. This will help you determine the length of the spindle for the replacement handle. To do this, simply determine the length of the square peg sticking out from the base of the handle and use that as a reference.

This is particularly important for inline uPVC handles for windows, since they are always straight and will only open to the left or right. They won't work in the middle. If you're not sure of the kind of handle you have in your home, it can be beneficial to get an existing handle from your neighbour's home and see the way it works to get an idea.

You can also determine the handiness of a uPVC window by watching the way the handle turns when it is used. Handed handles can be turned clockwise or counter-clockwise. If you are unsure then ask someone to open the window using the handle and observe what happens.

Measure the spindle

Selecting the right replacement handle for your windows could be a bit difficult since not all handles are the same size. It is important to measure the spindle accurately when fitting the new handle. This will ensure that the handle fits. There are many different kinds of uPVC window handles that work in different ways, therefore it is crucial that you know which kind of handle you have and the type of locking system that you are using.

Espag handles have a spindle that extends from the rear of the handle and then into the lock gearbox within the window frame. When you turn the handle it turns the lock inside the gearbox, and opens the window. They are installed on uPVC windows with casement and can be locked with keys to increase security.

Cockspur handles are equipped with a "nose" which closes over a wedge-shaped striker block on the frame and they are usually found on older double glazed replacement windows-glazed uPVC windows. They are also quite easy to install and can be locked with keys. They can be a little more difficult to find replacements for because they are not as common as the handles with a espagnolette.

If you have a tilt and turn uPVC window, you'll require a particular type of uPVC replacement handle with an additional locking mechanism. This will be able to open the window by tilting it, but also rotate it inwards and outwards to open it fully. You must choose a handle with an opening of at least 55mm to be able to reach the window frame.

You can follow the same method to remove and replace this kind of uPVC handle, but you'll need to be cautious when you remove the old one. It is possible to open the window more than normal to reach both screws that hold it to the frame. Once you have put in your new uPVC handle and verified that it is in the proper position, you can tighten the screws and test the lock to ensure it functions correctly.

Fit the new handle

Once you have the right handle replacement, it will simply screw into the right place. This requires a screwdriver but could be simpler with an electric one. When screwing the screws in, it is important not to over tighten the screws as this could cause the handle to crack or warp.

The second step in installing the handle is to insert the spindle. This is the component that is inserted into the handle and operates the locking mechanism inside the window. It is vital that it is fitted correctly, as this will ensure that the window double Glazing replacement can be opened and closed securely.

There are many different types of uPVC handles. These include:

Espagnolette Handles - these are inline handles that can be used to tilt and turn windows to open the window.

Cranked Espagnolette Handles: These are like inline handles but have a curvaceous shape that can be useful for hard-to-reach windows.

Tilt and turn handles - They are used to operate the opening mechanisms and closing mechanisms for tilt and turn. They also move windows.

These are the most commonly used and the majority of uPVC windows have these in their place. In the UK they are usually referred to as "Bay Windows".

If your uPVC window handle is damaged, it can be very frustrating. There is no need to replace the entire uPVC windows because of a broken window handle. There are several easy ways to repair and replace a damaged uPVC window handle.

You can fix your broken window handle swiftly by identifying the model and measuring the spindle. It is essential to be patient and prioritize safety when working with windows or tools, but this is a relatively simple task. It can be the difference between a safe and secure home, or a vulnerable, easily opened window! If you have any concerns or want to talk to a professional about replacing your window handle, contact Bridgewater Glass. We have a group of experienced and knowledgeable professionals who can assist you with any problems you might be experiencing.