• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Almost all customers agree that these replacement window handles made of upvc are simple to install and feel as good quality. However, it's important to know that the type of handle you select should be appropriate for your window.

The most important aspect is the step height that is the distance from the handle's nose to the base or frame. Other considerations include locking mechanisms and designs.

Replacement parts

There are a wide range of replacement window handles made of upvc available for purchase. There are a variety of designs and colors to pick from, so you're sure to find something that is compatible with your windows. It's easy to buy something on impulse particularly when the handle breaks. It is therefore advisable to do some research before purchasing a replacement. First, you need to know what type of handles made from upvc you have and what the differences between them. The table below lists the most commonly used handles to help you find the right one to match your window.

The majority of double-glazed windows today come with epag handles. They are typically attached to the frame with two screws which screw into the frame from both sides.

The spindle bar in the back may be of different sizes, and will determine if they're left-handed or right-handed. It is important to determine the measurements of the handle you currently have to ensure that you get the correct replacement.

The arm is attached to the frame with two bolts, just like the Espag handle. The arm has a lower projection, so that it doesn't damage your blinds. This is a great choice if you want the handle to blend with your blinds and windows made of upvc.

Cockspur handles are similar to Espag handles, but they have a nose which closes over a wedge, which is placed on the frame of the window. This kind handle is found on a few older wooden and upvc windows.

Tilt and turn handles are often found on casement windows. They can be operated by turning the handle or pushing on the top of the window. This allows you to open the window from inside and clean it from outside without the need to climb a ladder or walk across the fence. They are also a great alternative for those with limited mobility and can be an excellent method to improve security and accessibility in the home.

Hints and tips

Many people will have to replace their uPVC window handles at some moment. It's important to have some tips and tricks that can make the job easier.

Find out what kind of handle is in your home. Depending on the type of handle and locking mechanism, it could be necessary to replace the handle and lock. If the roller cams or shoot bolts (espags) are stuck or are seizing up, you'll need to replace them along with the handle.

Thankfully, the majority of uPVC handles are very similar and conform to industry standards for sizes, making replacing them a simple process. First, you must remove the screw covers on the handles. These are usually pozidrive screws. Once they are removed, you can then take the handle apart.

If you've got the handle separated, it's an ideal idea to take an inventory of how much of the spindle protrudes from the base of the handle. This will allow you to measure the spindle length for a replacement handle. Simply take note of the length the square peg sticks out of the bottom of handle.

This is especially important for inline uPVC handles for windows, since they are always straight and only open left or right. They will not work in the middle. If you're unsure of the kind of handle you have in your home, it could be a good idea to take an existing handle from your neighbour's home and see how it operates to get an idea.

You can also determine the hands of a uPVC window by watching the way the handle turns when it is in use. Handed handles can turn either clockwise or counter-clockwise. If you are unsure you are, ask someone else to open the window with the handle and observe how it works.

Measure the spindle

It isn't easy to select the appropriate replacement handle for your window since not all handles have the same dimensions. The spindle is the mechanism that locks the window and it is crucial that when fitting the new handle that you measure the length of the spindle accurately to ensure that it will fit. There are many different kinds of uPVC window handles that operate in different ways, so it is essential that you know which kind of handle you are using and the type of locking system.

Espag handles have a spindle that extends from the rear of the handle and then into the lock gearbox inside the window frame. When you turn the handle it turns the lock inside the gearbox and opens the window. They are installed on uPVC windows with casement and can be locked using keys to increase security.

Cockspur handles are typically found in older double-glazed uPVC window frames. They are characterized by a "nose", which closes over a wedge shaped striker block. They are also easy to use and can be locked using keys. It can be more difficult to replace these handles as they are not as popular as the handles made of espagnolette.

If you own a tilt-and-turn uPVC, you will require a replacement handle with an alternative locking system. It can open the window, but also rotate it back and forth to fully open it. It is essential to make sure that the handle you pick has a spindle size at least 55mm, or it will not be able to reach into the window frame.

The same method can be used to remove and replace the uPVC handle. However, you will need to take care when unscrewing it. It is possible to open the window wider than normal to reach both screws that attach it to the frame. After you have installed your new uPVC handles and checked that they are in the correct position and tighten the screws and then test to ensure the lock works properly.

Install the new handle

Once you have the correct Replacement Window Pane handle, it should simply be screwed into place. This will require a screwdriver and might be easier using an electric one. When screwing the screws in, it is crucial not to over tighten the screws as this can cause the handle to warp or crack.

Another important step to take when fitting the new handle is to insert the spindle. The spindle is the component that runs through the handle and operates the locking mechanism inside the window. It is important that the part is fitted correctly to allow the window to open and closed securely.

There are a variety of different kinds of uPVC window handles. There are a variety of window handles made of uPVC.

Espagnolette Handles are handles inline that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are similar to inline handles but have a curvaceous shape which is ideal for hard-to reach windows.

Tilt and Turn Handles These are used on tilt and turn windows for operating the closing and opening mechanisms.

These are the most common and the majority cost of windows replacement uPVC windows have these in place. In the UK they are often called "Bay Windows".

If your uPVC window handle is broken it can be extremely frustrating. There isn't any need to replace the entire uPVC windows replacement near me because of a damaged handle. There are a few easy steps you can follow to repair or replace a damaged uPVC handle.

You can fix your broken window handle quickly by identifying the model and determining the spindle. When working with tools and windows it is essential to prioritize safety. However it is a easy task. It could make the difference between having a secure and safe home or a vulnerable open window! Bridgewater Glass is the place to visit if you have any questions or would like to speak to an expert regarding replacing your window handle. We have a team of experienced and knowledgeable professionals who can assist with any issues you might be experiencing.