• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this situation you'll need to find some plastic spacers that will help the new pane to fit correctly into the window frame.

If you are going to try to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor and could be trampled under.

It's a great idea to seal the gap after the glass is removed. This will stop drafts and water from getting into your home until a professional arrives to fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is significant, you may prefer security screens that has a window. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time they may be afflicted by a variety of problems including sliding. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to open the windows to get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in place.

If you are unable to move the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen. Often, this is caused by screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. The first step is to close your window and do an initial test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's important to take action. Water leaks from windows can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is a simple fix that can be completed by any DIYer who has the ability. Based on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk is applied. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce your energy efficiency.

Verify that the drainage holes do not have debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leak originates from the glass in your double glazed window repairs glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. Again this can easily be fixed by a upvc window repairs window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with an ease. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. Changing a window hinge is an easy procedure, but it is simpler when you have a person to assist in holding the frame up.

Check that the uPVC hinges are closed and open in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain way or by improper installation in the factory. Sending us a picture through our website can often solve the issue. We are happy to provide suggestions.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be unbalanced due to wear, causing an opening between the frame and sash. If they are damaged beyond repair, it could be necessary to have them realigned. In addition, the interlock could be misaligned. This happens on the hinge side and might require to be cleaned. In some instances it is possible to replace these.

The next common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some sort of filler and can be put on the windowsill on top. These will help to block out cold air and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and eventually, they will reach an point at which it is more cost-effective to replace them rather than repair them. If you have any problems with your Upvc window it is recommended to speak with a professional as soon as possible.