• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor, where they could be trampled.

It's a great idea tape the gap once the glass has been removed. This will stop drafts and water from entering your property until a professional arrives to fix the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. Over time, they can develop a variety of issues, including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can access the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the fitting. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loose their elasticity. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it could be due to the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close the window and then perform a test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who is competent. Depending on how serious the issue is, old caulking may have to be removed. It is crucial to remember that when it comes to upvc window repairs (nadn.Iptime.org) you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double glazed window repairs glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with ease it could be hinges at the fault. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window but it's much easier if someone else helps you hold the frame.

Check that the uPVC hinges open and close in the right direction. You can do this by checking for the arrows on each hinge, this indicates which way the window should open.

The issue could be caused by opening the window incorrectly or a faulty installation in the factory. Sending us a picture via our website will often resolve the problem. We are always happy to provide assistance.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges, also due to wear and tear can become misaligned, this will cause an opening to appear where the sash meets the frame. These can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it might be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it is possible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time, and let air escape through these gaps. Installing high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and decrease draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be hung over your window sill. They can keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security in your home with regular maintenance and repairs. However, it is important to realize that all windows have a life span and there may come the point when it's more efficient to replace them than repair them. If you have any problems with your window made of upvc, it's best to consult an expert immediately.