• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to decay or rust as aluminum and timber.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the fabric rather than on the floor where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will prevent drafts and water from entering your home until a professional comes out to fix the window repairs. It also acts as a barrier, deterring any intruders to gain access into your home. If the gap is large, you may want to consider using a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, over time they may be afflicted by a variety of issues like sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to get at the frame. Then, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and verify the an appropriate fit. If you are happy with the fit of the window, you can tighten screws to secure them in the right position.

If you can't reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could also be due to the handle mechanism wears out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to shut the window and then perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is crucial to take action if you get up each morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how serious the problem is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it blows open with an ease. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy process, but it's simpler if you have someone to help you hold the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can check this by checking for the arrows on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain manner or because of poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you suggestions.

It is also essential to lubricate the hinges regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also reduce the possibility of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges can also become misaligned due to wear, creating gaps between the frame and sash. If they are damaged beyond repair, it could be necessary to get them re-aligned. The interlock, which is on the hinge side of the window, may be misaligned. Again, it's feasible to give them a good clean, but in some cases it might be necessary to have them replaced.

These seals can wear down or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes which are filled with a sort of filler and can be placed on the top of your windowsill. They can keep your home warm by blocking cold air.

Your upvc window repairs near me windows can continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to recognize that all windows have a life span and there may come a point where it is more efficient to replace them than fix them. So, if you're experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.